Jump to content
SAU Community

Recommended Posts

Dude, I just spent $700 repairing these wheels. If I sold them I would even get what I paid for them (which was too much for starters). :laugh:

Will definitely make the wheels wider if it's cheap enough.

whitehorse industries i think its called?

for real, i feel bad for you come in here ask for advice and get burnt to a crisp everytime.

sell the wheels u got now, get the right wheels through streeter or something worth the wait and save ya self f**kin around.

:laugh:

probably the most worthwhile post i've ever made, someone quote this shit.

there

Dude, I just spent $700 repairing these wheels. If I sold them I would even get what I paid for them (which was too much for starters). :laugh:

Will definitely make the wheels wider if it's cheap enough.

make wheels wider?

even if it is possible, it wouldnt be cheap

Sweet! This sounds like a good option..

I really don't want to sell my current wheels after spending so much money getting them repaired and redone in a custom colour.

Edited by jezza boii
Sweet! This sounds like a good option..

I really don't want to sell my current wheels after spending so much money getting them repaired and redone in a custom colour.

except that the wheels that you've got can't be widened. good luck with that.

I won't say the business that I bought the wheels through.. but I was expecting them to be in good condition.

Turns out they were structurally damaged and needed extensive repair work.

Wheels were: $1650

Repair: $700

Tires: $1100

So around $3500 all up. Worth over 40% of the car price haha...

I won't say the business that I bought the wheels through.. but I was expecting them to be in good condition.

Turns out they were structurally damaged and needed extensive repair work.

Wheels were: $1650

Repair: $700

Tires: $1100

So around $3500 all up. Worth over 40% of the car price haha...

why didn't you test fit beforehand? :laugh:

why didn't you test fit beforehand? :blink:

Coz I paid for them before they even landed in Australia.. Plus I knew the rears would be tucked in. These are the wheels that Hamish suggested I get. He said I would want a 10mm spacer though.

N00b question.... Would it hurt to have a little bit of positive camber in the rears? So they look wider than they really are? And then a little bit of negative camber in the front?

Or would that make the car handle like a bag of dicks?

do not run positive camber in the rears. It'll mean when you corner your rear wheels will have minimal contact with the surface. your car is already snap oversteering inclined cos all your weight is on the rear, guess what happens when you have no grip as well in the rear?

Find a 10mm spacer and STFU

10mm/15mm bolt on spacer. then STFU, get your balls in a bunch and roll your guards. do it or I will punch you in your sandy, fickle, good advice ignoring vagina. yes, this justaposition implies you're a hermaphrodite. deal w/ it.

Or cut your losses, sell the wheels and actually buy ones that will fit instead of ghettoing it up, and getting cheap shit on a whim that it may fit.

Where do I get a 10mm spacer with hubcentric rings to suit? I could find any. That's the only reason I went for the 20mm

I really can't afford to count my losses.. I'm running out of cash very quickly. Still need to get a new gearbox and address the rust that is starting to appear.

Edited by jezza boii

http://www.nissansilvia.com/forums/index.p...howtopic=406553

15mm then man up and roll the guard.

you can get 10mm from the US/Japan, but expect to pay a lot more.

Like these:

Ichiba_NS50210_1_12869.jpg

Ichiba_NS50210_2_12869.jpg

http://www.nissansilvia.com/forums/index.p...howtopic=406553

15mm then man up and roll the guard.

you can get 10mm from the US/Japan, but expect to pay a lot more.

Like these:

Rear guards are already rolled. Wouldn't they need to be flared though? My fronts hit the guard like a mofo and they're only sticking out 6mm.

15mm spacers in the rear would mean 10+mm out of the guard.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...