Jump to content
SAU Community

Recommended Posts

Poor turnout for the Show n Shine, was there for about 20min... I vote my car for the loudest, Jamie heard me driving down the main road haha.

Where did you get yours made up?

What material is it made of?

Poor turnout for the Show n Shine, was there for about 20min... I vote my car for the loudest, Jamie heard me driving down the main road haha.

lol you guys are gonna get pinned like eeeeeeeeeeeeervy day

Full stainless, hiflow cat only :P I rarely drive anywhere, only to work, which is a 10minute drive

Who did the exhaust?

PM me if you prefer, I'd like to have twin stainless steel and fix my twin muffler while I'm at it.

decat mang... mine is a cat shell with the ends cut off and a 3" pipe through it.

cant possibly get fine for it as it 100% looks the same as a cat

have heard of them using a temperature gun to see if its a real cat or not. also doesnt it sound hollow when tapped compared to a normal cat?

have heard of them using a temperature gun to see if its a real cat or not. also doesnt it sound hollow when tapped compared to a normal cat?

with the pipe welded into a shell it doesn't sound hollow.

if they hit it with a temp gun the best they could ascertain is that it's a cat that has broken over time and give an EPA - to which you would NEVER turn up to with the decat.

they can't actually PROVE anything....

of course there are about 600 other things they could pick on.... lol

yeh but it could be a f**ked cat.... they cant prove you were intentionally running without a working cat unless they drop it....

although, the way labour is running this state i wouldn't be surprised if vicpol will be issued with toolkits soon

either way that is pretty much a thing of the past now as a copper can just tick a box on a NOU that epa's you, and ANY car can be given an NOU without much hassle so they don't need to bother checking things like that.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...