Jump to content
SAU Community

Recommended Posts

yer but its under the current power to weight ratio for sedans, that the exemption i want to apply for, if it works out, yay, if not, expensive lesson :spank:

don't be retarded. They use the factory power to weight ratios to calculate the exemption, not what some habib cobbles together. you won't get the exemption and you'll be further out of pocket. I'm willing to put money on this.

don't be retarded. They use the factory power to weight ratios to calculate the exemption, not what some habib cobbles together. you won't get the exemption and you'll be further out of pocket. I'm willing to put money on this.

sent the form today.. see how i go

wish me luck, and on the actual form, it shows what turbo family cars are not covered, almost all of them were 6 speed manuals or had DSG boxes/ highpo autos so i think i might get lucky. not holding my breath thoughconfused.gif

Rome wasnt built in a day. Put in the effort and the rewards will be visible. :thumbsup:

True.

Thinking of getting rid of interior and put in cage and bride seats now...

I hate myself all the time.

True.

Thinking of getting rid of interior and put in cage and bride seats now...

I hate myself all the time.

haha after my full epa, ive had my hks2530, 550cc sard injectors, z32 afm & nistune sitting in a box for couple of months. Still deciding whether to put them back on the car or sell them off. Life is stress-free not having to worry about copping another defect/epa haha

haha after my full epa, ive had my hks2530, 550cc sard injectors, z32 afm & nistune sitting in a box for couple of months. Still deciding whether to put them back on the car or sell them off. Life is stress-free not having to worry about copping another defect/epa haha

I fear the day it may happen to me.

I'd better start hiding this and that... Or leave it as is, and start worry when I finally met 'nice policeman' (or policewoman).

haha after my full epa, ive had my hks2530, 550cc sard injectors, z32 afm & nistune sitting in a box for couple of months. Still deciding whether to put them back on the car or sell them off. Life is stress-free not having to worry about copping another defect/epa haha

You know you want the power :P

Edited by El_Mutto

haha after my full epa, ive had my hks2530, 550cc sard injectors, z32 afm & nistune sitting in a box for couple of months. Still deciding whether to put them back on the car or sell them off. Life is stress-free not having to worry about copping another defect/epa haha

If you leave it as is, they've won man. They've won.

What you talking about?!

Which N1 turbos are you referring to?

I have 34 N1 with HKS actuators and HKS EVC 4 (may be 3) but it is rubbish compared to HKS GT-SS running solely on HKS Actuators.

I think new tune is in order.

Moral of story is... shouldv'e bought a R33.

I fear the day it may happen to me.

I'd better start hiding this and that... Or leave it as is, and start worry when I finally met 'nice policeman' (or policewoman).

haha yeah it aint nice. It came down to a bleed-valve which made me rip everything else off :/

You know you want the power :P

haha sorta over the power chasing phase. Thinking of improving braking and appearance now. Less hassles.

If you leave it as is, they've won man. They've won.

haha i know :(

Although they will truly win if i sell up the car.

I have 34 N1 with HKS actuators and HKS EVC 4 (may be 3) but it is rubbish compared to HKS GT-SS running solely on HKS Actuators.

I think new tune is in order.

Moral of story is... shouldv'e bought a R33.

R34 GTR N1 Turbos have the same specs as HKS GT-SS, as in the Compressor Wheel and Turbine Wheel.

Previous owner would have just upgraded the actuators to HKS to replicate the HKS GT-SS to save from buying 2 whole new Turbos... IMO.

Both these Turbos are pretty much the equivalent to the Garrett -7's Turbos.

I believe Garrett make all Turbos, aftermarket tuning houses just put their name / badge on it and give it a different name :P

I have 34 N1 with HKS actuators and HKS EVC 4 (may be 3) but it is rubbish compared to HKS GT-SS running solely on HKS Actuators.

I think new tune is in order.

Moral of story is... shouldv'e bought a R33.

oi

interested in one of your HKS actuators. How much you let one go for?

R34 GTR N1 Turbos have the same specs as HKS GT-SS, as in the Compressor Wheel and Turbine Wheel.

Previous owner would have just upgraded the actuators to HKS to replicate the HKS GT-SS to save from buying 2 whole new Turbos... IMO.

Both these Turbos are pretty much the equivalent to the Garrett -7's Turbos.

I believe Garrett make all Turbos, aftermarket tuning houses just put their name / badge on it and give it a different name :P

Nope -7 and -9 (aka GT-SS) aren't the same, slighty different compressor wheel. -9 without EBC spools nice and early than -7 with EBC.

I wonder what would happen if I whacked EBC in my old 33 GTR and have it set up aggressively, I'd never know.

oi

interested in one of your HKS actuators. How much you let one go for?

$200 and you get 2nd one for free, alternatively, make an reasonable offer and you still get 2nd one for free.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...