Jump to content
SAU Community

Recommended Posts

Need a memory card for my camera but have no idea what to get. Am technologically retarded. Anyone here have any recommendations that would like to share? Will be taking hundreds of photos. Cost not an issue.

Think of it like this, the average decent quality picture is about 5MB so for every 1GB you get in your memory card is roughly 200 photos you can fit, some of the better quality (higher res) cameras will take photos about 10MB each so obviously that would be 100 photos per 1GB.. get a 8 16 or 32 GB card.. will be sweet :thumbsup:

i see no purpose in taking 5mb photots that are like 4096x2048 though

its just too big for anything useful

unless you have a 25,000 pixel printer at home

pics that are like half the size and half the rest would be just as good

and youd be able to take twice as many

Take me on as a first year and pay me commercial EBA rates. Problem solved.

fine by me but he's being a tight arse lately. Have mentioned you to him once or twice before, no go...

Have you thought about taking up different trade? If I was to quit for whatever reason I'd take up plumbing mainly coz plumbers pwn sparkies money wise. Job's a bit dirtier but meh.

i see no purpose in taking 5mb photots that are like 4096x2048 though

its just too big for anything useful

unless you have a 25,000 pixel printer at home

pics that are like half the size and half the rest would be just as good

and youd be able to take twice as many

Yeah I always fiddle around with file size, even if you are on a holiday and realize your card is half full.. can just adjust your file size - completely agree 4k + resolution is a bit ghey. (unless its actually your profession or something)

Oh hai! What were you in?

my discgraceful bone stock R32 i was in left lane going straight towards eastlink spotted the cube out of the corner of my eye and was like what the!... ohhhh a cube haha, ive been looking at getting one theres only one for sale in the country with a sunroof and cant get hold of the guy lol :( 1.4L, sunroof, autech kit, 5 seater, some gayass rims

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...