Jump to content
SAU Community

Recommended Posts

Get rid of existing and get braided from the turbo to the block. Personally I would get something custom made from somewhere like Enzed (well actually I make my own lines using Speedflow gear, but I assume you're not game to try that?). But plenty of people on here seem to be using the Kando lines with no problems.

FYI both 6262 and 6266 are rated as 700HP items. I'd be chasing that 66 CEA item, better tech is where its at.

The 6262 is 700hp and 6266 is 735hp.

Don't be fooled by the CEA crap, the wheel sizes have an influence over response, and the 6262 is more responsive.

It might be that the 62mm wheel is more responsive, but by how much? You can see that the CEA wheel has better blade design and would be an overall lighter rotating assembly. Im also confident the 66mm wheel would flow a metric shit load more.

If you were going 3L down the track I can see that the 66 mil would make for an intensely fast car.. but yeah I can accept 4mm in turbine exducer isn't anything to scoff at.

Thanks hanaldo, I will look at the lines a bit, sorry for the spam on the Precision thread but did you end up re-tuning your G3 again/ killawasps?

Edited by rondofj

On my car I have had a 6265, 6765,6766 and 7175. I have witnessed a 150rpm difference between a 6262 and 6265, hardly noticable, but there was also a couple of hundred revs between the 65 and 66 turbine wheels on my own car.

Yes it picked up 30hp atw but the point I was trying to make was, PTE marketed the same if not better response between the CEA wheel replacement wheels of the 65. Maybe that is the case with identical sized wheels, but from my experience not a bigger CEA vs smaller wheel. You can physically see the difference in the thickness of the older wheels.

On my car I have had a 6265, 6765,6766 and 7175. I have witnessed a 150rpm difference between a 6262 and 6265, hardly noticable, but there was also a couple of hundred revs between the 65 and 66 turbine wheels on my own car.

Yes it picked up 30hp atw but the point I was trying to make was, PTE marketed the same if not better response between the CEA wheel replacement wheels of the 65. Maybe that is the case with identical sized wheels, but from my experience not a bigger CEA vs smaller wheel. You can physically see the difference in the thickness of the older wheels.

It's funny that a 3 mm larger wheel with a 62 mm front was only 150 but 1 extra mm on a 67 was alot more noticable. Hmm.

got to remember that its 1mm on the exducer but they dont tell us what they have changed on the inducer. Could be a way larger wheel in a smaller trim... or could be a smaller wheel in a larger trim. Who knows..

PJ did you ever dismantle yours to measure the inducer on the turbine side? I have always wondered why PT dont farking advertise those figures. With the smaller stuff I had a feeling they kept it to themselves because the numbers would match up to older tech T3/T4 based things. Bad for business when your marketing 'new tech'. Obviously we know overall measurements are not the be all and end all, but it would certainly raise the question.

Yes we did, and you could be onto something there :whistling: either way they worked and worked well!

It would be interesting to back to back a CEA of the same size, but after spending 10 grand of my own money on Precision turbo's, I might leave it for one of you boys to step up :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...