Jump to content
SAU Community

Recommended Posts

Get rid of existing and get braided from the turbo to the block. Personally I would get something custom made from somewhere like Enzed (well actually I make my own lines using Speedflow gear, but I assume you're not game to try that?). But plenty of people on here seem to be using the Kando lines with no problems.

FYI both 6262 and 6266 are rated as 700HP items. I'd be chasing that 66 CEA item, better tech is where its at.

The 6262 is 700hp and 6266 is 735hp.

Don't be fooled by the CEA crap, the wheel sizes have an influence over response, and the 6262 is more responsive.

It might be that the 62mm wheel is more responsive, but by how much? You can see that the CEA wheel has better blade design and would be an overall lighter rotating assembly. Im also confident the 66mm wheel would flow a metric shit load more.

If you were going 3L down the track I can see that the 66 mil would make for an intensely fast car.. but yeah I can accept 4mm in turbine exducer isn't anything to scoff at.

Thanks hanaldo, I will look at the lines a bit, sorry for the spam on the Precision thread but did you end up re-tuning your G3 again/ killawasps?

Edited by rondofj

On my car I have had a 6265, 6765,6766 and 7175. I have witnessed a 150rpm difference between a 6262 and 6265, hardly noticable, but there was also a couple of hundred revs between the 65 and 66 turbine wheels on my own car.

Yes it picked up 30hp atw but the point I was trying to make was, PTE marketed the same if not better response between the CEA wheel replacement wheels of the 65. Maybe that is the case with identical sized wheels, but from my experience not a bigger CEA vs smaller wheel. You can physically see the difference in the thickness of the older wheels.

On my car I have had a 6265, 6765,6766 and 7175. I have witnessed a 150rpm difference between a 6262 and 6265, hardly noticable, but there was also a couple of hundred revs between the 65 and 66 turbine wheels on my own car.

Yes it picked up 30hp atw but the point I was trying to make was, PTE marketed the same if not better response between the CEA wheel replacement wheels of the 65. Maybe that is the case with identical sized wheels, but from my experience not a bigger CEA vs smaller wheel. You can physically see the difference in the thickness of the older wheels.

It's funny that a 3 mm larger wheel with a 62 mm front was only 150 but 1 extra mm on a 67 was alot more noticable. Hmm.

got to remember that its 1mm on the exducer but they dont tell us what they have changed on the inducer. Could be a way larger wheel in a smaller trim... or could be a smaller wheel in a larger trim. Who knows..

PJ did you ever dismantle yours to measure the inducer on the turbine side? I have always wondered why PT dont farking advertise those figures. With the smaller stuff I had a feeling they kept it to themselves because the numbers would match up to older tech T3/T4 based things. Bad for business when your marketing 'new tech'. Obviously we know overall measurements are not the be all and end all, but it would certainly raise the question.

Yes we did, and you could be onto something there :whistling: either way they worked and worked well!

It would be interesting to back to back a CEA of the same size, but after spending 10 grand of my own money on Precision turbo's, I might leave it for one of you boys to step up :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...