Jump to content
SAU Community

Recommended Posts

No doubt, mine isn't getting pushed at all and it's starting to get right up there power vs power rating wise.

I just find it hard to imagine a larger turbo on basically the same motor set up as mine and Jez's is making almost double the power at 4000rpm and a huge extra wack of hp top end... All while being on 99 octane fuel vs Jez and myself on E85

If I thought that graph was genuine and repeatable I would have already sent an email requesting an invoice for the purchase :)

Any thoughts on how it is possible? I agree, it seems unbelieveable - but there has to be an explanation! SAE doesn't inflate numbers THAT much unless the temp sensor is somewhere silly, perhaps.

Might have to check more MGT dyno results to see if they have other numbers which seem too good to be true - they are meant to be a reputable outfit.

<edit> I think I have found a trend :(http://www.gtr.co.uk/forum/176121-high-power-rb25s-mapped.html

Any thoughts on how it is possible? I agree, it seems unbelieveable - but there has to be an explanation! SAE doesn't inflate numbers THAT much unless the temp sensor is somewhere silly, perhaps.

Might have to check more MGT dyno results to see if they have other numbers which seem too good to be true - they are meant to be a reputable outfit.

<edit> I think I have found a trend :(http://www.gtr.co.uk/forum/176121-high-power-rb25s-mapped.html

Lol you are everywhere when it comes to turbo results :P

Probably wont be able to get much help here but what would you guys recommend for a n1 motor with vcam?

6262 .84 twin scroll seems to be the go for a 26 but with vcam would the 6266 be the better choice with a bigger rear (1.0+).

Car sees a little track mainly for street though and will be run on e85. Ideally I'd want 450awkw+

  • 2 weeks later...

i rekon a 6266 .84 divided rear would be choice

I got that same turbo on my built 26, still have standard cams, e85 etc getting tuned Friday so I can post up a graph then, will be good to compare to all the 6262 graphs getting around

Edited by SiR_RB

Update guys, The Old girl made 350kw 15 psi 430kw 24psi, 30psi made 436kw @ 6000rpm ignition prob the splitfires arent coping plus Im thinking the exhaust maybe holding it back 3.5 inch dump pipe 3.0 inch exhaust maybe to much back pressure we will check & see whats going on. Should be up around 500 plus in my eyes gate is vented straight out with screamer pipe. Need to iron out the little bugs then hopfully see some decent numbers.

Very nice mate!


When does this all start to happen, RPM wise?


I would have to agree that 3" is too small for any part of the exhaust when reaching for those power limits.. 500kw is basically 4" TBE zone.

Didn't it make good power on pump gas? If it can made 450kw on straight pump gas then it should be able to make a fair bit more than that on E85... if it isn't then the cause is more likely to be ignition or something along those lines.

to put it straight Lithium, The 450kw was on race fuel at autosalon with to4z .82 rear 24psi, was making 430 on pump98. Just its really bugging me that it seems stuck at 400 plus. In all Honesty it should crack 500 plus @30psi one would think engine sounds great. Did a comp test evrything is good 134,134,134,135,137,134. Thinking either LS2 coils or okada what your thoughts about the situation?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...