Jump to content
SAU Community

Recommended Posts

unfortunately not. Yavuz and my girlfriend went through the previous dyno runs so i am not exactly sure why they couldnt find something that was comparable. It was also becoming quite time consuming as we have used Unigroup for years and there are loads of runs that have been done on their dyno over that time so we kind of gave up on looking

It does drive a lot different and i am sure the drag strip will tell me its a different car.

Standard head studs and we dont want to lift the head. We are only using E-Flex without an ethanol sensor so had to leave some room for safety, and its only a street car ;)

I know many will say stock head studs should be fine but honestly, 485rwkw in an S14 is way more than enough for now. It leaves us some more power for when we get bored ;)

Edited by ido09s

Jez posted up on FB an update on his gtr yesterday. Stock motor, so studs and HG stock, and he lifted the head at 435 or so rwkw.

Oh, that's with a 6262

I couldn't imagine a 485kw S14....!

That is just silly :)

We went with the 6766 as the response is pretty much the same as the 6466 and it has the ability to make a bit more power. Its also made more power at lower boost which is always a good thing. Comparing it to the T78 we had on it its quite a bit more power for the same boost levels.

The plan isnt to stay that way trust me.

Next step is to get some head studs, an ethanol sensor and get it all sorted. Will put more boost in it and see where it goes. It ran 137mph on ET Street with about 420rwkw so see what it does with the new setup ;)

  • 1 month later...

Nice!

Precision are also about to release a few more of their new Gen2 CEA range - probably one of the more interesting to 'streetable' people fiends on here would be the PT6870, which is apparently rated to just over 1000hp. Will be interesting to see how that goes when results start filtering through.

Nice!

Precision are also about to release a few more of their new Gen2 CEA range - probably one of the more interesting to 'streetable' people fiends on here would be the PT6870, which is apparently rated to just over 1000hp. Will be interesting to see how that goes when results start filtering through.

hmmm interesting will be definetely waiting for those.

Some of you may already know we temporarily made the jump to an 8285 on the SR and took it out with a no mercy attitude. It was going to either go mega fast or turn into a grenade. It chose the later option! Sprayed the track and in the process the tyres. We were on 58psi and all I can say is when it came on from 2nd gear wow....never felt anything like it.

Another close call with a wall, but in Flying 500 style managed to save it. Bottom end is carnage!! Glad I didn't wrap the car, I have plenty of SR spares.

http://www.youtube.com/watch?v=xACxbx6C6R8

And the incar...

http://www.youtube.com/watch?v=OivcTogApps&feature=youtu.be

Something spectacular was going to happen and you delivered :)

Im just glad you didnt scratch the roof!

Looking at the incar, oil pressure light at the top of second, engine rattled 3rd and BOOM 4th :(

wow is all i can say!!!!

Thats one hell of a save given there was no chute involved

Just curious PJ, is it just me or my lack of knowledge when it comes to cars as quick as yours, but does the engine bog down quite a lot on launch with your car? What 60 footers does it run?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...