Jump to content
SAU Community

Recommended Posts

5 hours ago, ido09s said:

fark me, 49psi!!!!! what fuel?

I am hoping to make 550rwkw at 30 odd psi with a 6766. I currently make 485rwkw at 23psi and the car runs 138mph all day long which is the true dyno ;)

Is that on a 2.6? 

  • Like 1
9 hours ago, ido09s said:

fark me, 49psi!!!!! what fuel?

I am hoping to make 550rwkw at 30 odd psi with a 6766. I currently make 485rwkw at 23psi and the car runs 138mph all day long which is the true dyno ;)

Which ar?T4 ? 

Had my car on the dyno yesterday.. 570hp on 20psi,

Built 25 with the gen 2 6266 t3 .82

Currently the car is blowing alittle smoke on idle (typical precision?) so i wanna get that sorted aswell as a cas syncing issue before turning it up alittle more... 

Other then that im stoked with how it drives and comes on

IMG_7808.JPG

Edited by azzada1
  • 1 month later...
12 hours ago, acr said:

Do you think it will be possible to make around 700kw from a 6870 - h cover 1.15 rear on at rb28. Head has been ported and built? Trying to keep under 40psi. 

No one else has weighed in so I'll bite :)  Those turbos have been proven to make that power and more @ wheels on the "right dyno".   I personally wouldn't expect that kind of number on a Mainline or a Dyno Dynamics, but a Dynojet or Dynapack I'd say is plausible IF the engine spec and all supporting mods are up to it.    

E85 would be a must, btw.

Edited by Lithium

From my vague memory I've seen one do 700kw on a Dyno Dynamics fairly easily, may have been just under but not much (I was replacing my gearbox at the time so was a little distracted). That was a 2.8L and from memory around a 1.0 rear

12 hours ago, SimonR32 said:

From my vague memory I've seen one do 700kw on a Dyno Dynamics fairly easily, may have been just under but not much (I was replacing my gearbox at the time so was a little distracted). That was a 2.8L and from memory around a 1.0 rear

Sweet, that's good to know - I'm always cautious setting expectations on those dynos, people have gone >1000whp on other more popular breeds of dyno but its hard to know how to convert.

I reckon you will make it, but you'll need around 40psi these turbos love boost. I'm using 6870 1.0 rear just made 488hp on 15psi 98 pump fuel. Nothing to serious as it's just a run in tune my motor is only 2.7 and not built for 98 pump. Also it was on a mainline dyno 4wd

Edited by QUP29
  • 4 weeks later...
On ‎15‎/‎12‎/‎2016 at 2:41 PM, azzada1 said:

Had my car on the dyno yesterday.. 570hp on 20psi,

Built 25 with the gen 2 6266 t3 .82

Currently the car is blowing alittle smoke on idle (typical precision?) so i wanna get that sorted aswell as a cas syncing issue before turning it up alittle more... 

Other then that im stoked with how it drives and comes on

IMG_7808.JPG

Ok after getting frustrated with the smoke on idle and struggling to believe it was the brand new turbo with an inline oil filter I pulled the motor down and came across afew problems from when it was first assembled.. oil rings weren't to flash, acl pistons had hit and snapped off 5 of 6 oil squirters and we also found some glass beads in the head... frustrating but at least we found the real issues and tbh the motor was cheaper then the turbo..

My Reason for this post was to clarify that the smoke was not in fact the turbo, However if I hadn't had the inline filter I fear the turbo may have been damaged and needed a rebuild, the filter caught about 5 small pieces of glass and sand.. For the $80 it costs for the earls filter it seems almost stupid not to run it as insurance.

The motor has been rebuilt now and I've ordered a ross trigger kit to eliminate the CAS issues, I look forward to turning it up to see what the 6266 can do on 25-30psi on the rb25.

  • 2 months later...

If anyone is chasing a new 7685 (waiting list at most places), I've got a brand new (test-fitted only) 7685 gen 2, dual ball-bearing, 1.12 ceramic coated exhaust housing. Should crack 1000whp with correct supporting mods.

Chasing $4800 (RRP is around $5500) or swap for a 6870 gen 2 (prefer 1.15 twinscroll rear) with cash my way.

PM me if interested.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...