Jump to content
SAU Community

Recommended Posts

ill definelty try that, i was playing around with different settings but i dont think i used that one will post up pics when i try it :)

Hmm, the Exif data says that the flash was fired for that first shot.

If you're using Firefox, try this program and take notes of what settings people are using for various photos: https://addons.mozilla.org/en-US/firefox/addon/5673. It doesn't work on all photos, but it should help you out.

  • Replies 200
  • Created
  • Last Reply

Top Posters In This Topic

The last shot is great. Would love to see a bigger pic of it.

Agree with Sid - would love to see bigger versions.

CPL you say? Gotta check that out, being car obsessed and all.

CPL = Circular Polarising Filter

And I can't comment if it would actually make car shots better

IMO awesome car shots DO have reflections.

Trick is to not have crappy stuff IN the reflections lol

Facebook l Redbubble l Twitter l

© Copyright All rights reserved Aaron Radford 2010

Here is a Larger version

Strobist Setup

Canon 430exII @ 1/2 power on light stand approx 6ft camera right shooting down onto models back.

Flying_Low_by_aaron_r_photography.jpg

Erm... CPL DOES cut out the reflections.

As you rotate it lets in light from different angles, so you can twist to let some reflections in, and glare out, or twist to remove reflections and let glare in. It Imagine all the light coming to you is made up of 3 sine waves moving sideways like slinkys. one is horizontal, one is vertical, one is 45" between. The CPL removes the light from ONE of these directions, changing as you rotate it. Wow I sound like professor frink! WHOOO HAveNNNNNN and the MOnkeys!!!

\ |

\ |

--------

| \

| \

I'll post up an example when i get home. I have a few test shots from the same angle to show the difference. :/

This is how you can imagine it works - look at the second picture here: http://en.wikipedia.org/wiki/Polarizer

Basically lots of light coming from all directions - CPL cuts it out and only lets light from a certain direction come through. Rotating it changes this direction.

(direction might not be the best word here but you get the idea)

Back in April 2008 when I bought my first CPL I got it for better colours and cool looking sky's

Here are four sample pics I took (None of them have any PP done)

1_before.jpg1_after.jpg

2_before.jpg2_after.jpg

well the way I thought it worked was as glare being diffracted light and reflections being reflected light, and a polarizer will only permit light in one plane to enter the lens. So my assumption is that a CPL will remove glare, but will only remove the intensity of a reflection, but not completely.

if your polariser is letting in the reflection of a hot chick next to the car, that's a good reflection.

if your polariser is letting in the refection of extra light from the sun you don't want, that's glare!

You know what i mean anwyay :)

You need a little more exposure and post processing on that one. You didn't get anything but the highlights on the car. You're having trouble adjusting for brights to darks.

Try and equal your shot out by the EV reading on the camera compare night and point it at the car and see what the white equals and adjust for the best of both which should be in the middle of both.

Does that make sense to you?

EDIT

Looks like you shot in Auto mode as well, you need to shoot in M (manual) mode and mess around with your EV and Aperture. There are some nice guides here on the forums in this section. As well, you should never let your camera get to 1600 ISO unless it is something you just can not capture any other way. Get grain real bad at those levels.

Edited by AKW

Not sure what Ev is either, but on my Cannon (unsure about Nikons) Tv is Time Variable, meaning you can put it on a tripod and use a longer exposure. Also, try adjusting the white balance to get the colours right.

Btw, your car looks great now. Maybe some clear indicators and some work Meisters would look AWESOME on that thing! Possibly a front mount as well :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...