Jump to content
SAU Community

Recommended Posts

We were all talking about the R34 GT-R that had 380,000kms on auction last week (or was that 2 weeks ago). Well it was sold today for 1,560,000 yen which equates to about $18,500 in aussie dollars. Then add the usual FOB, freight, taxes, compliance, and other misc fees and you will have yourself a GT-R for under 30 grand.

I can't wait until she lands on our shores, so everyone stay tuned for this baby.

http://ayp5.nihoncars.com/cars/37815341/0/...T__sl__6yyn.jpg

http://ayp5.nihoncars.com/cars/37815341/0/..._sl__6yy%3F.jpg

http://ayp5.nihoncars.com/cars/37815341/0/...T__sl__63y3.jpg

Link to comment
https://www.sau.com.au/forums/topic/315902-the-380000km-r34-gt-r-sold/
Share on other sites

Other pearlers worth mentioning as well.

2001 M Spec (well it's claimed to be but I doubt it's the real deal), 165,000kms, grade 3.5/B --- sold for 2 mil yen

http://ayp5.nihoncars.com/cars/37792099/0/..._sl__nynO3l.JPG

http://ayp5.nihoncars.com/cars/37792099/0/..._sl__nynO3x.JPG

  • 2 weeks later...
That raises a point; how often do r34's come up with mechanical issues?

Eg a blown motor (bearings or similar), surely they would be priced close to this 380,000k one?

I saw a rolled NUR Spec in Millenium Jade at Nagoya a few months ago. There was not an undamaged panel on the car and it sold for 1.1mill. Prices lately are just bizarre, absolutely all over the place.

I saw a rolled NUR Spec in Millenium Jade at Nagoya a few months ago. There was not an undamaged panel on the car and it sold for 1.1mill. Prices lately are just bizarre, absolutely all over the place.

Rolled? Bloody hell, what a waste.

I mean one thats structurally fine, clean enough inside etc but a blown motor, or a blown gearbox (or just no motor and box altogether)?

Motors over here are easy enough to buy, or just build :ermm:

As you can tell by the prices they pull at auction, if a 34 has a blown engine or box it will simply be replaced or repaired.

It's not like they're at a value whereby if the engine is blown they're worth nothing. So, if you were to find one with a blown donk, it would likely only be cheaper by the value of a rebuild engine.

Even if you were to find one like this, the extra shipping costs due to it not being drivable with outweigh any real benefit.

I saw a rolled NUR Spec in Millenium Jade at Nagoya a few months ago. There was not an undamaged panel on the car and it sold for 1.1mill. Prices lately are just bizarre, absolutely all over the place.

I remember that one, I think I put 500,000 or something on it just for the engine/drivertrain...

Rolled? Bloody hell, what a waste.

I mean one thats structurally fine, clean enough inside etc but a blown motor, or a blown gearbox (or just no motor and box altogether)?

Motors over here are easy enough to buy, or just build :ermm:

THese generally don't make it to auction, they get bought by dealers or fixed by the owners. Plenty of rattly 32/33s go through but generally the type of person who owns a 34 has the money to fix the car before selling it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...