Jump to content
SAU Community

Recommended Posts

My parts just arrived from hks.. :(

This includes the gt600 kit + bigger fmic, trans cooler, titanium exhaust etc.. here are some pics:

23856_1107035012288_1719195671_200108_3414870_n.jpg

23856_1107034652279_1719195671_200107_7858547_n.jpg

23856_1107035132291_1719195671_200109_1646612_n.jpg

23856_1107035212293_1719195671_200110_3720403_n.jpg

23856_1107036092315_1719195671_200112_2515742_n.jpg

23856_1107035412298_1719195671_200111_161673_n.jpg

The workshop is going to take pictures of the entire build process so I will have some interesting pics to post over the next month.

Start date is April 13. Should be finished by May 1st.

Link to comment
https://www.sau.com.au/forums/topic/315942-so-it-begins-the-mods/
Share on other sites

LOL you even have an entire room to put all your parts in.

haha that's what I thought too!

Looks like an excellent project, will be good to see how a brand name jap kit goes, haven't seen any full hks setups in Oz yet except Quinn's targa car.

Any chance of posting progress pics?

That is what he said he was going to do...

The workshop is going to take pictures of the entire build process so I will have some interesting pics to post over the next month.

Start date is April 13. Should be finished by May 1st.

Can not wait to see the build pics

The car was on dyno today.. in stock form it put out 425awhp.

Video here http://www.myr35.com/

exhaust goes on tomorrow and will probably go on the dyno again to see the power gains before the other gear goes on.

Edited by druzilla32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...