Jump to content
SAU Community

Recommended Posts

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

Hi Scott,

Got your deposit thanks.

No, Rays have released more offsets and sizes for other cars too

Cheers

Do you know what size rotors fit the 17 X 9,5 +12 ? These are my old 345 brake kit in 18 x 9.5 +12 LM GT-4's (there's a little bit of space here). The guy I sold them to squeezed them into some 17's (almost perfect fit actually).

The SL is supposed to have better clearance yeah? I still cannot see a 355mm kit fitting.

lmgt4.jpg

clint.jpg

Cheers

Scott

Edited by K-Style
Do you know what size rotors fit the 17 X 9,5 +12 ? These are my old 345 brake kit in 18 x 9.5 +12 LM GT-4's (there's a little bit of space here). The guy I sold them to squeezed them into some 17's (almost perfect fit actually).

The SL is supposed to have better clearance yeah? I still cannot see a 355mm kit fitting.

lmgt4.jpg

clint.jpg

Cheers

Scott

Hi Scott,

SL should have the same clearance as the regular TE37, the mods to save weight was shaving on the other rim..

What other sizes are out?

Supra sizes in 19's?

I'm not sure on the offsets of Supra's, below are the sizes;

17's

17x7.5+40

17x8.5+40

17x9+22

17x9.5+12+28+35

18's

18x8.5+35

18x9+45

18x9.5+22+35+40

18x10+20

18x10.5+15+22

18x11+18

19's

19x9.5+22

10x10.5+12+22

19x11+23

  • 2 weeks later...
  • 3 weeks later...

Guys, we have left from our container arriving mid November the following TE37 SL including 19's!!! So wants to be the first in OZ to fit SL's on their Skyline??!!

4 x 17x9+22 $3200

4 x 18x10.5+15 $3500

4 x 18x11+18 $3600

4 x 19x9.5+22 $3700

4 x 19x10.5+22 $3800

  • 2 weeks later...
How long until you get some 19x10.5 +12 in? In not in a great rush

They will be going on an R34 GTR will this be a good size without rubbing or poking out?

Cheers

Matt

Hi MAtt,

We have 4pcs arriving in this shipment, not 100% sure with the rubbing...may have to ask the R34 GTR guys on this forum for advice.

Cheers

Ken

How long until you get some 19x10.5 +12 in? In not in a great rush

They will be going on an R34 GTR will this be a good size without rubbing or poking out?

Cheers

Matt

depending on how much castor and camber you're running. More castor you pull, the more chances you'll rub the plastics. I have about 1.5 deg camber and 6 deg castor and it rubs at near full lock.

depending on how much castor and camber you're running. More castor you pull, the more chances you'll rub the plastics. I have about 1.5 deg camber and 6 deg castor and it rubs at near full lock.

You've got mail Ken!

Thanks Eugene, i have seen a few 34's with 19x10.5 and it does look tough. If it only rubs on full lock i can live with that.

Cheers

Matt




  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...