Jump to content
SAU Community

Recommended Posts

Hey guys. I was looking to buy my first Skyline, did my homework, looked around and ended up pretty happy with this R34 GTT. Picked up the bank cheque this morning, spent 1.5k on some fresh rubber and some stockies as he wanted to keep the rims, sorted out all the insurance, even had the transfer of ownership forms filled out and ready to be signed.

Did an inspection and compression test as a last thing this afternoon. Everything was looking good, no accident damage, no rust. Just needed new tyres, new brake pads..stuff like that. And then... compression test results:

160

150

105

155

100

110

:ermm:

It was totally unexpected, as the car runs smoothly, doesn't blow smoke or cough and sputter. Was really only doing it as a last peace of mind kind of thing. :l

The question now is, is it worthwhile getting a second opinion? It just seems kind of weird that not one.. not two.. but 3 of the 6 cylinders are leaking so badly, while the others are going strong at 150-160. I'm thinking it could be a dodgy test, but the mechanic said he double checked and got the same numbers, so I'm not too sure..

I'm really quite dissapointed :l If everything checked out, it would be in my garage right now!! :blush:

Has anyone here been in a similar situation or have any advice? Not too sure where to go from here :S

Thanks guys

Lyndon

I think its more likely to be incorrect compression test results unless it is running like shit or blows heaps of smoke on boost.

was it warm when you tested it

was the battery fully charged

was the cas unplugged

was the throttle fully open while cranking

was it a screw in or push in type of tester?

Surely the mechanic who compression tested it also did a leakdown test afterwards to tell you WHY the compression is down right?

If not, then get a second opinion. Sounds dodgey. I have replaced 2 comp test gauges in the last 4 years. They don't last forever

Thanks for the replies guys. The car was driven to the workshop, which is about a 30 min journey at freeway speeds, so I'm guessing it was done warm?

That's the thing though.. it drives very smoothly and doesn't blow a puff of smoke even when revved up to 6k rpm. Not sure what kind of test was done though, we just left it at the mechanic's and went to grab the transfer forms and transferred the car back onto regular plates. :S Was done at a workshop I found in the WA consolidated workshop thread, and was recommended to me by forum users D:

Had a chat with the seller, he looked genuinely surprised and said he definitely wants to pay for a second opinion, so I guess I'll wait for the results of that and take it from there. :S

Also, just curious- how does the leak down test actually work? I've heard it mentioned here and there, but not 100% sure what it actually means :S

Thanks guys :ermm:

Leak down test is similar to a compression test, but it measures pressure loss instead of pressure.

What they do is remove all the spark plugs, screw in a threaded coupling attached to a leakage gauge, and then feed about 80-90psi of compressed air into the cylinder. Any more than 30% leakage and you have a problem.

Leak down tests also make it alot easier to diagnose what the problem is, as Daniel pointed out. For example if you can hear the air coming out of the throttle body that would indicate a leaky intake valve. Or if a cylinder has poor compression but minimal leakage, that would usually indicate a valve-train problem, such as a collapsed lifter or worn cam lobe, etc.

i would probably say to get a second opinion if you're really keen on the car.

if you're not, or if the second test comes back bad, WALK AWAY!!

the last thing you want is to buy a Skyline that you know is going to need work, its not cheap.

and those that say it is cheap are lying.

Yeah.. if the second result is consistant with the first, I wouldn't hesitate to walk away. :blink: It's just that I'm not sure if the result is accurate. Would be a pity if I gave up on this one due to a dodgy test, as the mechanic said everything else was in top knick :l

Lol that's ironic James. The place I took it for the first test was Allstar Garage literally across the road from Hyperdrive xD

Will give them a ring tmr to see if they can book me in later this week.

Cheers

Allstar Garage are my favs... Sean is the best in my opinion. No harm getting a second test done though, better to be safe than sorry, especially if the owner is paying for it. How long in advance did you book in at Allstar lol, they book out like 2 weeks in advance... Suppose it wasn't being tuned though.

Definitely walk away from it if the tests come back dodgy, there are plenty of R34's out there, would suck if you bought one of the lemons.

Allstar Garage are my favs... Sean is the best in my opinion.

I spoke to Sean on the phone and he managed to squeeze me in the very next day :D

It wasn't him who did the test though..was one of the younger mechanics.

Seller said he'll get it done again today.. will let you guys know how that goes.

I really am quite keen on this car! But if the results concur with the first... :D

Fingers crossed! :)

He was tied up with work, msged me saying he'll do it today with a kit he borrowed from work, as he's a mechanic. If that checks out, I'll get him to do another infront of me and then if a garage can verify it, I'm happy to take the car off him :) I'll let you guys know how it goes hopefully later tonight :S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...