Jump to content
SAU Community

Recommended Posts

Hi guys I am planning to make my Auto S2 Stagea mody to power between 230rwkw to 250rwkw, and I know what parts to get and I already start doing this now but until some of my friends who own WRX and 180sx they said my car will need to change the drive line or gearbox thing otherwise my car won't make pass 165rwkw. They said my 4wd system is same as wxr not strong , is this trust?? If I want to mody my S2 to 230rwkw then I will have to change the all the drive line , like gearbox or diff??

4WD will be fine, it's basically the same as the GTR 4WD system which can handle alot more than 250awkw. The auto box will handle it, I'm running around that power with a stock auto, my only issue is flaring in gearchanges under full load. I'm in the process of getting a shift kit to sort that out.

Edited by QWK32

no, the AWD system is actually based on the GT4 which was NA - the only GTR based systems were in the Autech. Its kinda interesting really, the stagea was the ONLY RB25DET powered AWD system Nissan ever made...

Yes the gearbox will handle it, as will the diffs, transfer case etc, but to make sure I would recommend a thermo controlled trans oil cooler and a shift kit as a sensible precaution

While looking for a shift kit for my re5, I was told the re4 was good for over 1000 hp once built.

+1 A shift kit will help stop the wearing clutch slip that occurs when powering up the engine.

Yes, and the re4 is a much stronger box. M35 uses the electronic throttle to limit the torque so they could lighten the box a bit.

So mine S2 stagea autobox can hold 1000hp? then should be enought to handle 250rwkw as well.

You will definately need a higher rated torque converter at that power. Mine sucked ass with the stock converter...

When mine was stock, my 60ft was 1.9. With the 30R+other mods and stock converter, it was 2.2.

Haven't run it yet with the higher stall, but feels ALOT better with it!

So mine S2 stagea autobox can hold 1000hp? then should be enought to handle 250rwkw as well.

Only once built. I guess any more than around 200kw you would need the shift kit fitted at a minimum.

Only once built. I guess any more than around 200kw you would need the shift kit fitted at a minimum.

where can i buy the shift kit for my S2 stagea? from ebay? or import monster?how is the shift kit look like? i am sorry i know nothing about car thing.

where can i buy the shift kit for my S2 stagea? from ebay? or import monster?how is the shift kit look like? i am sorry i know nothing about car thing.

Pretty sure that MV Automatics have shift kits for your car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...