Jump to content
SAU Community

Recommended Posts

ive got the same problem in my 33 gts4. The AWD Light Is On And when the AWD comes in the SLIP light dose not flash on. It is still working tho.

Ive had is checked out by two different mechanics and an auto electrician and they cant find the problem, I had it hooked up to a Nissan diag test and it came up with an ABS problem, Got a new unit and Still the same issue.

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5219412
Share on other sites

Have you got the same size tyres and rims front and rear? Having different rolling circumfrances will cause this problem as the computer reads the front wheel travelling faster than the rears or vice versa

Edited by R32GTS4NZ
Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5227410
Share on other sites

Have you got the same size tyres and rims front and rear? Having different rolling circumfrances will cause this problem as the computer reads the front wheel travelling faster than the rears or vice versa

This... different wheel circumfrence is bad enough for a regular diff, and for AWD... my parents dropped about $5k worth on diff repair/replacement in their Volvo XC70 before it was discovered that a tyre shop (that shall remain nameless) put the wrong diameter tyre on... fairly subtle difference too apparently. Aforementioned tyre shop ended up reimbursing them for diff repair/replacement, towing fees etc.

So I wouldn't at all surprised if it would also cause ATTESA to chuck a spaz.

http://www.skylinesaustralia.com/forums/St...amp;pid=4643006 - suggests that a 2% difference in rolling diameter is acceptable, maybe check your tyre/rim sizes?

If it's not that, I have NFI coz I don't really know much about ATTESA :P (jack in fact)

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5231608
Share on other sites

Hi guys,

Just want to know how to check if your 4wd is working? My 4wd light is on and the fuse is in aswell. What could be the problem if my 4wd isnt kicking in.

Thanks

If the 4wd light is on, there is a fault. So obviously it isn't going to work.

Check the fault code.

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5232286
Share on other sites

The light isn't on to tell you it is working... there is a fault. Wether you in particular have some weird-o issue that no matter the amount of auto tech's can't find is not the question, in the op's case that is what he needs to do first.

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5232436
Share on other sites

if you want to see if its working, drop the clutch on some grass and see if the front tyres spun as well. either the grass will be flat, beaten and ripped a bit, or it'll be dug up. or do the same on some dirt or something. but if the car flys off into the distance instead of just sitting there burning out its probably working...

Link to comment
https://www.sau.com.au/forums/topic/319614-r32-gts-4/#findComment-5232900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...