Jump to content
SAU Community

Recommended Posts

Just been burnt again by the drop down banner adds that have started sprouting up.

In inadvertently mouse over one when trying to use the top right menu options, the damn thing expands and clickawhammo!!! immediate annoyance ensues.

I understand the need for third party advertising here, and i dont know what a viable fix is for this, but cane someone help me try and come up with one because they drive me insane.

Maybe swap the sau banner to the right and the add to the left above the lesser used menu... or something

Link to comment
https://www.sau.com.au/forums/topic/320146-drop-down-banner-ads/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

yeah i could block them, but i like to leave all things enabled as far as SAU goes, i figure the ads are there to help raise cash for C to run the site and all, so i should avoid blocking them where possible.

Cheers Nis, as i said, its more an annoyance than a crisis, extending the ad down to almost 3 times its original length seems a bit cheeky to me.

It will be the ad company not a forum change (i have to deal with ad providers with work).

Just been burnt again by the drop down banner adds that have started sprouting up.

In inadvertently mouse over one when trying to use the top right menu options, the damn thing expands and clickawhammo!!! immediate annoyance ensues.

I understand the need for third party advertising here, and i dont know what a viable fix is for this, but cane someone help me try and come up with one because they drive me insane.

Maybe swap the sau banner to the right and the add to the left above the lesser used menu... or something

I 2nd that motion, this place is becoming worse than channel 7 of late, maybe we should all pay $10/yr membership & piss them off totally, I mean I come on here to read about what my peers are up to or find some info-not to have f*@kin Lewis Hamilton promoting some BS like at the top of page today

^ mate please, the ad's here have not increased one iota for years. A little bit more fact wouldn't hurt.

The only minor addition was google ad's at the very bottom of the page in this time, something you probably didnt even notice.

The ad's everywhere else have remained the same for roughly 4 years now.

i concurr, its just the expanding ads that are an annoyance. The Land Rover one from last month was particularly annoying.

I'll be honest and say it actually led to me visiting the forum less, maybe sometjhing to consider going forward?

Cheers blokes, benno.

^ mate please, the ad's here have not increased one iota for years. A little bit more fact wouldn't hurt.

The only minor addition was google ad's at the very bottom of the page in this time, something you probably didnt even notice.

The ad's everywhere else have remained the same for roughly 4 years now.

Point taken, prob was a bit harshly put but, I stand by what I said. I accidentally hit the banner ad which covered the search icon in top task bar & was nearly blown outa my seat. I can understand a certain amount of advertising is inevitable esp with site maintenance costs rising all the time-but I would much rather pay than have them on here.

As to what I do & dont notice-I made the call didn't I? Was directed to unfolding banners at top which take up half a screen when mouse runs across them & they sure as hell weren't like that ever before(-not like Medicare ad which is no prob as it stays the same size) & the ones at bottom which dont unfold either-they are fine-ish lol

Besides the point- if some one doesn't like something then they can say their piece as far as I am concerned-providing there is no personal attack involved & their certainly wasn't one of those

As i said - it'll be a change from the advertisers end, not ours.

Something they will have changed and C will get onto it and sort it out in due time.

Yes it's a pain, yes it's an inconvenience - but at the same time this site needs income to exist.

We will have donations up eventually, but we cannot rely on them for site income/existence and MUST have ad's as certain income.

As i said - it'll be a change from the advertisers end, not ours.

Something they will have changed and C will get onto it and sort it out in due time.

Yes it's a pain, yes it's an inconvenience - but at the same time this site needs income to exist.

We will have donations up eventually, but we cannot rely on them for site income/existence and MUST have ad's as certain income.

Understood mate

Ahhh I see what you mean, I just got hit with the Lewis Homo ad by accidently waving my mouse near the top corner.....and the reply page did not finishing loading until the ad finished.

As Ash said I'm suspect Christian is not aware of or did not agree to such intrusive ads, but it may still take more than a day or 2 to action

BTW Mr Wooster....you have dribbled enough on these pages that its time for you to donate once the facility is back up and running :happy:

Stimps, the bandwidth from an ad is bugger all., and as mentioned advertising is needed to help run this site that you use free of charge.

Keep that in mind when you complain, its one thing if you say "its funcitonality is annoying, how can we change it for the better" its another if you say "your banner ad is costing me bandwidth that i pay for when i visit your site and use its features free of charge".

Perhaps if there was some waiver for paying members its one thing, but beggars cant be choosers.

and tbh, i prefer leaving the ads on so that maybe, one day, the cheap viagra ad i've been waiting for might pop up and both myself and prank can benefit from my clicking

Yeah, I'm not a fan of the expanding ones either, I'll contact my guy and see if we can get them off the rotation.

For the record, please please please dont use Adblock (Basti, I'm looking in your direction.) While you may not want the ads supporting multi national conglomerates from appearing on these pages, until we find another source of constant funding, we *need* them (and I really mean *need*.) Adblock defeats the purpose and if you want to support the site, you'll not use it.

I'm not a big 'ad' guy - I just need to make sure that at the end of the month, the giant hosting bill is paid from somewhere other than my own personal income.

I'm not a big 'ad' guy - I just need to make sure that at the end of the month, the giant hosting bill is paid from somewhere other than my own personal income.

that....is a VERY selfish attitude. WTF? I want free forums full of good information where I can read, post and download as much as I want while someone else pays for it!

Yeah, I'm not a fan of the expanding ones either, I'll contact my guy and see if we can get them off the rotation.

For the record, please please please dont use Adblock (Basti, I'm looking in your direction.) While you may not want the ads supporting multi national conglomerates from appearing on these pages, until we find another source of constant funding, we *need* them (and I really mean *need*.) Adblock defeats the purpose and if you want to support the site, you'll not use it.

I'm not a big 'ad' guy - I just need to make sure that at the end of the month, the giant hosting bill is paid from somewhere other than my own personal income.

:thumbsup: yeah no worries mate. im using it atm as a way to load pages faster, seeing as i've hit my DL cap. will turn it off once im back on full speed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...