Jump to content
SAU Community

Motor choice  

52 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hi, i have been finally joined the broken RB club. :D

I have been considering many options of late in regards to what motor to build or throw into my GTS-T

The car is setup for track work and once this saga is over i would very much like to see it back on the track,

My goal is to have around 300rwkw that is reliable, an leave the motors almost untouched internally

I have the ability to build a 2530 or buy an rb26, so people in the know could you please give me some opinions

and also what is required for the rb26 to work eg. sump info.

Voice your opinion

what motor should i go for???

Edited by ON EDGE
Link to comment
https://www.sau.com.au/forums/topic/320346-rb2530-or-rb26-in-an-r33/
Share on other sites

Well really you got to think. You have an RB25 in there allready (not sure how modified it is, but if it does have a lot of aftermarket parts, you can use them all), so the most cost effective and easiest conversion is the 30 bottom end.

Well really you got to think. You have an RB25 in there allready (not sure how modified it is, but if it does have a lot of aftermarket parts, you can use them all), so the most cost effective and easiest conversion is the 30 bottom end.

well true your right i have the parts for a 270-300rwkw setup, but would the rb26 have a logical reason to put it in????

well true your right i have the parts for a 270-300rwkw setup, but would the rb26 have a logical reason to put it in????

Well if thats the case than there isnt really a need for a 26.

If the motor was bog stock than i'd suggest 26 but not if it means buying turbos, injectors etc all over again

expect to spend a couple thousand if you just want to drop your mods onto the 25/30 (money to cover block modification to suit RB25 head + misc modifications to make the loom/water lines etc fit. (more if you aren't doing the engine in/out work yourself)

i assume you have an R33? all the sensors/engine mounts/ballancer/water pump/oil pump etc bolt up to the block. careful using an RB25 sump make sure it doesn't have the fins that stick up below cyls 4-5 as the crank will hit them.

would i get away with just using an rb30 sump??

expect to spend a couple thousand if you just want to drop your mods onto the 25/30 (money to cover block modification to suit RB25 head + misc modifications to make the loom/water lines etc fit. (more if you aren't doing the engine in/out work yourself)

i assume you have an R33? all the sensors/engine mounts/ballancer/water pump/oil pump etc bolt up to the block. careful using an RB25 sump make sure it doesn't have the fins that stick up below cyls 4-5 as the crank will hit them.

nismoid..

this is the exact reason i didnt go rb2530 as the cops here in adelaide would send u over the pits as soon as the car rolled out the driveways which would mean that the car would have to have another rb25 dropped into it for it to pass insepction.. too much trouble IMO!

rb25 is a good engine.. just stick with that if its a streeter..

nismoid..

this is the exact reason i didnt go rb2530 as the cops here in adelaide would send u over the pits as soon as the car rolled out the driveways which would mean that the car would have to have another rb25 dropped into it for it to pass insepction.. too much trouble IMO!

rb25 is a good engine.. just stick with that if its a streeter..

ive buggered the bottom end, no point staying with it imo when i can upgrade, may as well while its broken. Rb30 should resemble some sort of low down torque unlike the 25.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...