Jump to content
SAU Community

Recommended Posts

Great job!

Whats next to do?

Ha ha, well..

Clean and polish!

Sort brakes out.

Catch can

Tune, maybe injectors...

Fit a stereo

Nismo MFD and install

Might be around Dural area every now and again! :D

Look forward to the next installment.

Catch can, this is one thing Im looking into at the moment.

Im interested in the Racepace units as seen on Tangomatt's 34 - going to chase up prices.

Is that the combined washer/catchcan? if so sounds good!

Got brakes back from being machined, on a lathe this time and they are better for street now, smooth, but high speed stop or heat in them still makes em shake a bit, so new rotors will be on the list I think. one is looking like it's had a better life.

Just took the car for a drive and it's been great!

Getrag 6speed is noisier at idle and taking off but thats due to the flywheel, no more dual mass.

The 2860-9's are what I'd thought they'd be like :yes: . Great response, meaty mid range and revs out nicely. It's running at 17psi, 1.2BAR on gauge is maxed out lol, injectors are at 90% and knock has a peak of 22, yet to be tuned but runs great.

In 6th gear I see 0.8bar, 12 PSI at 3000RPM. The way it comes on boost is impressive considering the stock cams, manifolds etc. The engine had cam gears already fitted so I haven't touched them.

Pulling out of corners, it just accelerates, so no real problem being in a higher gear too. :)

Let us know how much they are nick :banana:

Fitted up the alpine x types in the front door today, and bitumen deadener, then it rained so I still have to do the passenger side.

That's not my fully sik scubie by the way! :ermm:

post-12712-1278841564_thumb.jpgpost-12712-1278841636_thumb.jpg

post-12712-1278841741_thumb.jpgpost-12712-1278841813_thumb.jpg

Headunit hopefully this week. Come on tax refund!!

  • 4 weeks later...

Not much money now lol. Lot of it is doing it smart and not throwing money at it without having a plan/goal first. Made that mistake with the 32, spent way too much.

Will post up some pics soon, go away rain!

  • 4 weeks later...

Thanks Brad and Scott :blink: White is a pain to keep clean!

Audio is pretty much done, still have boot space. Also sorted out the catch can setup. Put a vent/drain into the dipstick hole from the catch can, seems to work well.

May go an alpine sub and mono block later on. A 4x100watt alpine amp is running the front and rear speakers from the audio processor.

post-12712-1283578434_thumb.jpgpost-12712-1283578488_thumb.jpg

post-12712-1283578553_thumb.jpgpost-12712-1283578606_thumb.jpg

post-12712-1283578657_thumb.jpgpost-12712-1283578776_thumb.jpg

Had it dyno tuned the other week and the standard wastegate actuators that I put onto the -9's aren't controlling the wastegates properly at high boost, see dyno graph.

Runs well though and new actuators are on the way. Still running stock injectors and afm's.

Also going to replace compliance cat and sort out exhaust.

post-12712-1283579192_thumb.jpg

Steve-o, maybe....:happy:

Pete, I ended up getting the catch can from just jap in Kirawee, comes with the hose, I bought extra hose to set it up how I wanted it.

Bryn, I'm pretty sure the non vspecs didn't have em as the exhaust temp and intake temp is not shown on the MFD, I could be wrong though as nissan do some strange stuff too. You can fit the rear vspec dump to a non vspec....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...