Jump to content
SAU Community

Recommended Posts

Could you have worded this ^^^ better?

You might have to ask for PMs - otherwise, recommendations are going to pronounce that 'A' is better than 'B'.

If you're in a hurry, the 'Search' button will reveal all...

HMM that says it all, Other then taking forever to do a job and being almost impossible to contact, Does he tune good! in anyones experience, I dont know if its just coensidence but everytime i go to him and i get something adjusted something else annoys me for example warm starts now hesitate to reach normal idle 3-5secs, lots of black smoke on boost = very rich, low kms from a whole tank = very rich also. Done my gearbox os giken 5 speed set with him he says the gearbox guy changed 4 synchros now i dont know if they are brand new synchros or what he says he wants to have a feel of it next time i go, But anyways SOMETIMES my gears feel somewhat notchy other times its normal isnt it supposed to feel like a brand new car 24/7 ? Im getting sick of taking my car back and forth!!

your better of tuning a r32 in rwd as the 4wd is not consistant and plays up in the lower throttle tuning, insight have 4wd dyno and are at arndell park ( near eastern creek )

Really hmm never heard that... How are insight? any bad news from them hows the staff etc

XCALBA You done a 11.3 1/4 on 290rwkw Damm nice run.. whats the trick lol?

Edited by GTRAAH
  • Like 1
Really hmm never heard that... How are insight? any bad news from them hows the staff etc

XCALBA You done a 11.3 1/4 on 290rwkw Damm nice run.. whats the trick lol?

scott and the guys are good they are doing a lot of race cars now one of which is tiltons time attack evo,after he retuned my car after someone else ( a big name tuning shop who charged me a puck load to have my car on the dyno for less than 1 hour for a new computer ) it drives like a factory car and gets about 550km a tank gd, trick is cam gears and 6500 rpm shifting and no big burn out to over heat turbos.

Have a look at the semi slicks he was running at WSID lolz!....seriously he had semis on!! Thats part of the trick!

was i i thought it was on bridgestone re001 adrenalins, but it might have been advan 048 it was 3 years ago and either way they where 265/35/18s and where what i was using as everday street tyres and not a purpose built drag tyre like m/t e/ts or toyo tqs

was i i thought it was on bridgestone re001 adrenalins, but it might have been advan 048 it was 3 years ago and either way they where 265/35/18s and where what i was using as everday street tyres and not a purpose built drag tyre like m/t e/ts or toyo tqs

That's what I'm getting at, the fact you ran a bloody good time since they weren't mickey T's etc!! :thumbsup:

HMM that says it all, Other then taking forever to do a job and being almost impossible to contact, Does he tune good! in anyones experience, I dont know if its just coensidence but everytime i go to him and i get something adjusted something else annoys me for example warm starts now hesitate to reach normal idle 3-5secs, lots of black smoke on boost = very rich, low kms from a whole tank = very rich also. Done my gearbox os giken 5 speed set with him he says the gearbox guy changed 4 synchros now i dont know if they are brand new synchros or what he says he wants to have a feel of it next time i go, But anyways SOMETIMES my gears feel somewhat notchy other times its normal isnt it supposed to feel like a brand new car 24/7 ? Im getting sick of taking my car back and forth!!

thats exactly what my car did after hills. If I am driving at say 4,000 rpm and then push the clutch in and watch the rev drop all the way to zero and then stall. It was a pfc tune too. Sometimes it wouldn't stall, it would barely catch it before zero and then cough up a big ball of black smoke. One thing was ok was on throttle the car ran very well. Nice smooth boost and good torque. I got 260awkw at 12psi boost. Not sure what it would make on 20psi, maybe 280?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...