Jump to content
SAU Community

Recommended Posts

Could you have worded this ^^^ better?

You might have to ask for PMs - otherwise, recommendations are going to pronounce that 'A' is better than 'B'.

If you're in a hurry, the 'Search' button will reveal all...

HMM that says it all, Other then taking forever to do a job and being almost impossible to contact, Does he tune good! in anyones experience, I dont know if its just coensidence but everytime i go to him and i get something adjusted something else annoys me for example warm starts now hesitate to reach normal idle 3-5secs, lots of black smoke on boost = very rich, low kms from a whole tank = very rich also. Done my gearbox os giken 5 speed set with him he says the gearbox guy changed 4 synchros now i dont know if they are brand new synchros or what he says he wants to have a feel of it next time i go, But anyways SOMETIMES my gears feel somewhat notchy other times its normal isnt it supposed to feel like a brand new car 24/7 ? Im getting sick of taking my car back and forth!!

your better of tuning a r32 in rwd as the 4wd is not consistant and plays up in the lower throttle tuning, insight have 4wd dyno and are at arndell park ( near eastern creek )

Really hmm never heard that... How are insight? any bad news from them hows the staff etc

XCALBA You done a 11.3 1/4 on 290rwkw Damm nice run.. whats the trick lol?

Edited by GTRAAH
  • Like 1
Really hmm never heard that... How are insight? any bad news from them hows the staff etc

XCALBA You done a 11.3 1/4 on 290rwkw Damm nice run.. whats the trick lol?

scott and the guys are good they are doing a lot of race cars now one of which is tiltons time attack evo,after he retuned my car after someone else ( a big name tuning shop who charged me a puck load to have my car on the dyno for less than 1 hour for a new computer ) it drives like a factory car and gets about 550km a tank gd, trick is cam gears and 6500 rpm shifting and no big burn out to over heat turbos.

Have a look at the semi slicks he was running at WSID lolz!....seriously he had semis on!! Thats part of the trick!

was i i thought it was on bridgestone re001 adrenalins, but it might have been advan 048 it was 3 years ago and either way they where 265/35/18s and where what i was using as everday street tyres and not a purpose built drag tyre like m/t e/ts or toyo tqs

was i i thought it was on bridgestone re001 adrenalins, but it might have been advan 048 it was 3 years ago and either way they where 265/35/18s and where what i was using as everday street tyres and not a purpose built drag tyre like m/t e/ts or toyo tqs

That's what I'm getting at, the fact you ran a bloody good time since they weren't mickey T's etc!! :thumbsup:

HMM that says it all, Other then taking forever to do a job and being almost impossible to contact, Does he tune good! in anyones experience, I dont know if its just coensidence but everytime i go to him and i get something adjusted something else annoys me for example warm starts now hesitate to reach normal idle 3-5secs, lots of black smoke on boost = very rich, low kms from a whole tank = very rich also. Done my gearbox os giken 5 speed set with him he says the gearbox guy changed 4 synchros now i dont know if they are brand new synchros or what he says he wants to have a feel of it next time i go, But anyways SOMETIMES my gears feel somewhat notchy other times its normal isnt it supposed to feel like a brand new car 24/7 ? Im getting sick of taking my car back and forth!!

thats exactly what my car did after hills. If I am driving at say 4,000 rpm and then push the clutch in and watch the rev drop all the way to zero and then stall. It was a pfc tune too. Sometimes it wouldn't stall, it would barely catch it before zero and then cough up a big ball of black smoke. One thing was ok was on throttle the car ran very well. Nice smooth boost and good torque. I got 260awkw at 12psi boost. Not sure what it would make on 20psi, maybe 280?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...