Jump to content
SAU Community

Removing A Turbo

r32_lover

By r32_lover,
in Engines & Forced Induction

 Share

Recommended Posts

r32_lover Rookie

r32_lover

Posted
Posted

hey guys

before you say, YES, i did do a search, found nothing to specifically help me.

i have a r32 gts-t and the seller, who was a chick mind you, told me its a rb25det engine, series 1 turbo. Now, i know a bit about it and i doubting weather or not it really is because its still a 2.0L 1998cc and only the rb20det came out like that, if it was the rb25 it would be 2.5L. Im pretty stumped so how can i find out what it actually is? Im not a pro at this kind of stuff but i do know a tad.

Also, if it is an after market turbo, not the stock rb20, how much would i look at if i wanted to remove it and how much effort. Being after market it shouldnt be too much right?

cheers

also im sorry if this is the wrong section, i couldnt find any other turbo related section.

Link to comment
https://www.sau.com.au/forums/topic/324487-removing-a-turbo/
Share on other sites
PM-R33 Grand Master

PM-R33

Posted
Posted

I don't get it.

You say the seller told you it had an RB25 and you are saying it has a RB20 in it. So the seller lied to you or didn't know. I'm sorry I just don't get your question? Or do you not know what engine it is?

As for the turbo removal it isn't hard if you are handy with a spanner, why are you wanting to remove it though? You mean so you can change it for something else?

paulr33 Grand Master

paulr33

Posted
Posted

john post a photo of the engine bay

or pm a link to an engine bay photo

it will be the quickest way to work out what engine it has

and then for the turbo do the same

take a photo of the area and post it up or pm a link

there are obvious visual differences between the two (rb20det turbo and rb25det turbo) - regardless of what engine it is on, so it sohuld be easy to pick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...