Jump to content
SAU Community

Recommended Posts

Hi rob and welcome to SAU. A few little details. Please ALWAYS use the search function (top right corner of the page) and see if your topic has been covered before. In almost all cases it has. Please DO NOT just make up new topics willy, nilly - we have enough trouble with important information topics being kicked off the front page in no time for the forums to be filled with redundant threads that have been answered before.

So, I suggest you go do a search and check the stickied 'workshop information' thread in the sticked thread section at the top of the SA forum.

i had my alarm installed by GT Autosound......they did an awesome work.....also had dealings with Auto Perfection and loved the service and quality of work from there too mate.....how far down south are you talking and if your willing to drive up a bit north as well :D

or save money....get a viper alarm and you wont regret it.....loads of functions and pretty cheap as well......then get it installed :P

Also one of the easiest alarms to get past if you know what youre doing :D

But in saying that, no alarm is good enough to stop someone from taking your car that knows what theyre doing anyways...

Edited by SkyHi_33
if someone is going to take my car then they are going to do whatever it takes to get it......regardless of what i do mate.....but a viper is a good enough investment for me

Also probably a good idea to not let people know what alarm you have ;P

I know its unlikely that any SAU member will be considering stealing a car but even car crims in lizbef have net access nowadays

-D

Troy you don't even need an alarm to be covered by insurance unless they absolutely made it clear that they wouldn't insure you without one.......if that was the case, they would tell you exactly what to install.

Having said that, best to always air on the side of caution and check with your insurance company as Troy stated....it's only a phone call.

I have no problem whatsoever with a dirty big blue VIPER symbol flashing on my dash window .... and it would seem the crooks do respect it, as I haven't had anyone touch my car (except for one small testing incident) and I park it everywhere. They also don't know it is the black wired version, I have 2 kill switches, and I have 4 of the loudest piezo screamers you have ever heard .... if their ears can take 30-90 seconds of those things going off in their ears while they hotwire the car, then they can have it.

well I've had Just Cars and Shannons and they both require alarms with proper immobilization points for agree coverage on my car

in case you want a real scare on car theft go here

CARSAFE theft stats per car

good old Adelaide, at least they can come first at something..lol

they must meet these regulations

AS/NZS 4601:1999 certified system include:

➜ Automatic immobilisation within 40 seconds

of ignition switch off;

➜ 2 independent points of immobilisation;

➜ Connections enclosed in security housing;

➜ All black security wiring;

➜ Flashing dashboard LED to indicate that the system

is armed; and

➜ Secure owner PIN override.

the alarm is only as good as the install, and the 100% use of it, even when it's in your garage

and there isn't any alarms that can't be cracked by a pro. if they want your car it's gone.

but it will prevent 95% of the other idiots from taking your car

multi layer security is best and common sense, don't leave your car in the hood..lol

in case you want a real scare on car theft go here

CARSAFE theft stats per car

good old Adelaide, at least they can come first at something..lol

Lol:

YOUR POSTCODE

With 5 or more thefts reported each week, postcode 5108 is one of the highest theft risk locations. We recommend that you read these simple precautions you can take to protect your vehicle from theft.

YOUR CAR

The NISSAN SKYLINE 1998 was not fitted with an immobiliser when it was manufactured and unless it has been fitted with an Australian Standards approved immobiliser since then it is at risk of theft.

New passenger cars sold in Australia are required to have an immobiliser but before 2001 many cars weren't fitted with them. As a result these cars are targets for opportunists to 'hotwire' using something as simple as a screwdriver.

Engine immobilisers provide the most effective barrier available between a thief and your car, as long as you keep your keys safe. Click here for more information.

I am with Just Cars Troy and all they wanted was any alarm with 2 point immobilisation. The original version of my alarm didn't come with black wiring and they didn't give a toss about it when I told them. I even gave them my alarm model number and they looked it up and said it was fine.

so what does an insurance company do when it comes to a pay out if the car is never recovered or burnt to the ground (unable to confirm proper alarm installation if any)........they payout regardless of policy

Well respected insurance companies - such as Shannons - specify a particular standard of alarm system (as per AS/NZS certification) and required documentation to prove installation by an accredited installer - I have both documents noted on my Shannons policy. As for insurance companies such as JC... if one doesn't have anything nice to say, best not to say anything at all.

When I crashed my S15 (my fault) JC were awesome in letting me choose repairer, varying the amount of work done (I added a fg bodykit in leiu of the standard bars they had allowed for). I really can't complain at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
    • Wrinkle black will be a thing for both
    • As I wait for parts to be delivered, I have managed to procure via a contact a R32 Nistune ECU......for now I just want to monitor what the car is doing but eventually.......who knows where we go 😂
    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
×
×
  • Create New...