Jump to content
SAU Community

Recommended Posts

I've done a search but cant really find exactly what iam after.

What are the best performing calipers and rotors to use on the 32 gtst (front and rear) that will bolt up with minimal modifications.

There seems to be a difference between the 32 gtr and 33 gtr calipers and rotors. Or are the 33 gtst ones the same as 32 gtr?

I have just put a RB26dett engine into my 32 gtst and although its still road regestered the conversion has not been engineered.

Iam looking at geting the car engineered soon and just want to know whats the biggest bolt on brakes I should use so I can make the conversion legal and also make the car stop properly!

Any help or advise is much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/325242-brake-upgrade-r32-gtst/
Share on other sites

32 gtr setup (rotors and calipers) bolt straight on. Ive got them on my car, and they are cheap to buy unless you buy a new set of rotors for them.

That would make the conversion legal. The only difference in the r33 and 32 gtr brakes is the casting marks on the calipers themselves. They are identical in performance however.

Edited by Bl4cK32
32 gtr setup (rotors and calipers) bolt straight on. Ive got them on my car, and they are cheap to buy unless you buy a new set of rotors for them.

That would make the conversion legal. The only difference in the r33 and 32 gtr brakes is the casting marks on the calipers themselves. They are identical in performance however.

Ok sweet, but isnt the difference that some are brembo callipers and the others are not?

Ok sweet, but isnt the difference that some are brembo callipers and the others are not?

Only the vspec R32's had brembos (with 324x30mm rotors, or is it 327?) but all the R33s Rs have them. Other R32 gtrs have the Nissan/Sumitomo caliper with the 296x32mm rotors. IIRC R33 gtsts are 296x30mm (so the caliper is a little narrower).

Only the vspec R32's had brembos (with 324x30mm rotors, or is it 327?) but all the R33s Rs have them. Other R32 gtrs have the Nissan/Sumitomo caliper with the 296x32mm rotors. IIRC R33 gtsts are 296x30mm (so the caliper is a little narrower).

Sp performance wise I would be best off going the r33 gtr setup with the brembos?

Depends how much you want to spend..

33gtr fronts are 324mm rotors and I am running those on my 32 with 33gtst calipers on adapter brackets. Those along with Ferodo DS2500 pads, braided lines, decent fluid and a master cylinder stopper. Stops pretty damn well and didn't cost anywhere near half as much as brembos.

Pretty much all the turbo skyline rears are identical.

  • 2 weeks later...
Sp performance wise I would be best off going the r33 gtr setup with the brembos?

kind of.....but the 33/34 gtr brembos are really bad price/performance option. Generally they go for 1500 second hand with dodgy discs and pads.

The 32 gtr/ 33 gtst ones re the ones to go for....good enough for most setups and $1k cheaper than the 33 gtr ones.

If you really want/need to spend $2k on brakes buy the ksport/d2/g4/etc 8 piston 330mm brakes, they are great for the price

kind of.....but the 33/34 gtr brembos are really bad price/performance option. Generally they go for 1500 second hand with dodgy discs and pads.

The 32 gtr/ 33 gtst ones re the ones to go for....good enough for most setups and $1k cheaper than the 33 gtr ones.

If you really want/need to spend $2k on brakes buy the ksport/d2/g4/etc 8 piston 330mm brakes, they are great for the price

Also another option if you can find them is R34 GTT brakes. 310mm nissan caliper/rotor and still pretty cheap. Only thing is you need to drill out the mounting holes in the hub. I've been running them for a few years. I'll be selling mine in a few months to go bigger.

R33 Gtst Calipers bolt straight up & are a hell of an improvement due to the extra heat soak the 297mm R33Gtst Rotor provides over the 279mm R32Gtst Rotor.

Get some decent brake Pads(I went Hawk Carbons), some RBF600 Motul fluid & maybe Slotted Rotors over Stock Rotors to aid in Gas removal & brake dust fouling

What Russman said. Small mod to hub for bigger bolts and 310mm goodness. Also, plenty of jap manufacturers make good quality rotors for the R34 GTT so you have access to a good range of wuality rotors to boot. Other then that if yo ucan buy some good quality used R32 GTR brakes then that could be a good thing. But they are old so make sure the seals are in good condition, no corrosion on pistons and rotors are not hammered.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...