Jump to content
SAU Community

Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Recent update.

Just inspected another R33 gts-t today. The last one was stick, this one was auto. This time, I had the guy drive it for me and show me the car's response when boost kicks in. Being a cold and rainy day today, he drove around normal to warm it up a bit for about 5 min. After that, he switched the selector gear to "2" and went the way through with it. Being a stock car, boost kicked in at 3000rpm and it held on till around 5500rpm when he let go. ( was in a residential area, so can't boost it all the way.)

Though being auto, when he was driving it normal in 1st and 2nd gear, the car feels like absolutely normal like it should. It didn't have that weird draggy feeling the first one had. Some of the guys here suggested a bigger turbo being installed into the first car. Possible, but imo it shouldn't affect the performance below 3000rpm. The first car felt like it was towing a bus at 1st gear and this one feels totally alright. So back to the first car, I would suspect that something somewhere needs an eye on it and the owner is either hiding it or not knowing it. Feels like a clutch or gear slip, but can't confirm.

the vl isnt a p plate car :whoops:

Oh but it is.

Taken from the Vicroads website

From 6 July 2009, drivers issued with a probationary licence on or after 1 July 2007 may drive some lower performance turbocharged or supercharged vehicles. The definition of a lower performance turbocharged or supercharged vehicle is a vehicle with 6 cylinders or less that is:

  • turbocharged or supercharged with a power to weight ratio of less than 100kW per tonne
  • turbocharged or supercharged with a power to weight ratio between 100kW and 125kW per tonne and that is considered to be a family type vehicle (4 seats or more) rather than a sports type vehicle. A family type vehicle is a sedan, station wagon or hatch normally used to carry families/passengers with 4 or more seats and are equipped with child restraint anchorages. A family type vehicle does not include a sports car (two door coupe).

So a factory VL Turbo would be perfectly legal as its under 125kw per ton

Nothing wrong with a N/A if your on your Ps or using as a daily to and from work, both in which I do... its been great never had a problem even when I get pulled over on the way to work (happened a few times now) they come up look at the brakes and go.. "bugger non turbo"

lol they actually say bugger non turbo?

dont buy an auto gtst, resell value is crap, you are restricted in terms of mods and it will annoy you

the manual GTST it light years ahead and is worth every extra cent

please please please do not get an auto GTST

the auto GTST also runs less boost than the manual

this is why it doesnt feel as a quick

auto is 5 psi factory and manual is 7psi

that's pretty debateable from a speed aspect lolz.

HOONDAs are where it's at for the p platers

ahem... golf R32's. 3.2L V6 (well, it's almost an I6) hot hatch.

y'all nga's be living in the 1990's still. N/A p-plater friendly lightweight cars rocking AWD and massive torque in lightweight bodies have been readily available in the past 10 years. just that most p-platers can't afford that shit on maccas wages.

Lol @ 5psi. How would you even feel that? :bunny: My car was 13psi factory. CT20B FTW.

5 PSI on a larger turbo = 13PSI on a turbo the size of your wiener.

Recent update.

Just inspected another R33 gts-t today. The last one was stick, this one was auto. This time, I had the guy drive it for me and show me the car's response when boost kicks in. Being a cold and rainy day today, he drove around normal to warm it up a bit for about 5 min. After that, he switched the selector gear to "2" and went the way through with it. Being a stock car, boost kicked in at 3000rpm and it held on till around 5500rpm when he let go. ( was in a residential area, so can't boost it all the way.)

Though being auto, when he was driving it normal in 1st and 2nd gear, the car feels like absolutely normal like it should. It didn't have that weird draggy feeling the first one had. Some of the guys here suggested a bigger turbo being installed into the first car. Possible, but imo it shouldn't affect the performance below 3000rpm. The first car felt like it was towing a bus at 1st gear and this one feels totally alright. So back to the first car, I would suspect that something somewhere needs an eye on it and the owner is either hiding it or not knowing it. Feels like a clutch or gear slip, but can't confirm.

Whereabouts is the first car you drove? Perhaps finding someone with a bit of experience who is willing to give you a hand might help?

If it's anywhere between Hurstbridge and Burwood I'm happy to help out. I've been playing with cars for a long, long time and although have only been in my Skyline for 7 months, I'm pretty up to speed on where to look and what a good one should be like.

  • 2 weeks later...
funkeh you missed out the high maintenence and purchase costs of the Golf (that and they are perceived as a bit of a fag/soccer mum car)

just give the habibs and muzzas about 10 years to catch up with the hot hatch trends sweeping across the world.

nga's need to drive a scirocco or abarth SS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...