Jump to content
SAU Community

Recommended Posts

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

We noticed a massive increase in midrange switching from PowerFC to Nistune (same tuner) on an S15. Nistune is ftw.

should be no "real" difference, but ultimately there will be a smidge unless you swap each timing mark across and load point exactly (same with fuelling).

We have done a few swaps between the two as well and to TBH its around 50 / 50 and always within a smidge of each other.

bout the only ecu i find has bigger variances is the Microtech due to the way it manages timing in the software.

Getting Nistune(d) by Trent this Saturday... Can't wait!!!!!!!!

Had a mate go to Chasers (Paul) last week and he seems to be happy with his tune. Though I've heard more bad about Chasers as well. Never heard a bad thing about Trent and his tuning abilities :D

Edited by blk15
should be no "real" difference, but ultimately there will be a smidge unless you swap each timing mark across and load point exactly (same with fuelling).

We have done a few swaps between the two as well and to TBH its around 50 / 50 and always within a smidge of each other.

bout the only ecu i find has bigger variances is the Microtech due to the way it manages timing in the software.

We had three different tuners tune the PowerFC on the S15 - Rob @ Sabaddin, Sam @ Dr Drift & yourself. No-one got it right. You might remember the car - stock looking white jap-spec S15 - made 245rwkw. A bit's changed now though.

Now with the Nistune is runs like a factory car. Cold start is perfect, return to idle after backing off throttle is perfect. The car's also making more peak power on the same boost. Why was the PowerFC so bad? It used to idle hunt like crazy, cold start was terrible, return to idle was terrible. That's all gone. Unless it was just a 'bad' PowerFC, I would never go near one on an SR. That goes for all the DET-conversion Pulsars I've been around with PowerFC's as well, same rubbish idle.

We had three different tuners tune the PowerFC on the S15 - Rob @ Sabaddin, Sam @ Dr Drift & yourself. No-one got it right. You might remember the car - stock looking white jap-spec S15 - made 245rwkw. A bit's changed now though.

Now with the Nistune is runs like a factory car. Cold start is perfect, return to idle after backing off throttle is perfect. The car's also making more peak power on the same boost. Why was the PowerFC so bad? It used to idle hunt like crazy, cold start was terrible, return to idle was terrible. That's all gone. Unless it was just a 'bad' PowerFC, I would never go near one on an SR. That goes for all the DET-conversion Pulsars I've been around with PowerFC's as well, same rubbish idle.

Yeah i do remember now, just after we opened it had a real bad case of PFC 'itis.

Most of the rubbish idles on pfc's are cause of the intake pipe and afm position..... but some pfc's dont care either way.. its weird, i think build number has a lot to do with it as the early serial numbers are way worse.

eep i hope my rb26 doesnt do that bad idle when i get pfc on :(

getting my exhaust on today.. cam gears / service done by GT hyper then i'll give you a call Trent :thumbsup:

Its an SR20 thing :P turbo snout and airbox are too close and custom intakes pipes create bad reversion older version PFC's hate it.

Car got tuned @ Status today!!! Very friendly/helpful, would definitely recommend them. Below are the results:

Year/Model: 01 Spec S (adm)

Engine/Size: 2.0 SR20DET

Turbo: t28 bush bearing

Power @ boost level: 185rwkw @ 15psi

Torque: 362.5 Nm

ECU: Nistune

Modifications: gktech fmic, fujitsubo exhaust, apexi intake, walbro fuel pump, turbotech mbc

My car initially made 162rwkw @ 14psi but was pinging its head off @ 14.5 AFR (massive black smoke at end of exhaust). I was really shocked and worried as trent could see.

But all is good now with the tune, sits nicely at 12AFR though the coilpacks are on the way out...

scan0002.jpg

scan0001.jpg

You can see it pinging (red)

Car now drives extremely smooth especially down low where it felt like a slug previously. Love the pull at around 3500rpm.

Thanks Trent for saving my engine :D

Edited by blk15
tbh the big thing for me is that Trent is a regular poster on the forums, and is happy to offer free advice, not saying anything bad about anyone else, but that shows a real commitment to customer service.

so when are you coming down from outerspace to get a tune?

meh im still sorting out whether I'll need a replacement dump pipe, gotta get AFM, new intercooler kit to fix up the boost leaks, and then I should be ready to get some Nistune love happening (i did have an insane thought of getting the Microtech retuned but yeah nah).

Don't think I'll be driving it from here to Melb again either lol (roads are like a rollercoaster until Bendigo!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...