Jump to content
SAU Community

Recommended Posts

I had a good look underneath the car today just to check for any problems and came across evidence of a small leak.

I'm unsure if this is a common thing on the M35's but just looking if anyone can help give me an idea where this leak is coming from.

From what I can see, it looks like it might be coming from loose hose clip.

The leak doesn't seem major, and there's no drips under the car overnight so far.

Looking at sorting out the leak, if anyone has any idea or can help, your input would be appreciated :)

IMG_0692.jpg

IMG_0693.jpg

IMG_0697.jpg

IMG_0695.jpg

IMG_0698.jpg

IMG_0700.jpg

Link to comment
https://www.sau.com.au/forums/topic/328637-help-with-leak-under-nm35/
Share on other sites

Small leak? :down:

It could be a few things, most likely the rear of the passenger side rocker cover, they are well known to leak from there. Fixed with a replacement rocker gasket.

It could also be one of the plug hole seals, mine had completely filled the rear plug and spilt out under acceleration. Fixed with a smear of silicone.

Hopefully it isn't the oil inlet for the turbo, its a pain to get at. Can you see oil weeping from the top? See if you can get the camera in there.

Thanks Scott.

I've inspected the rest of the engine bay as much as i can but couldn't trace it any further than that clip and where the arrows are.

I can't see anywhere else where the leak is coming from besides this part.

It doesn't seem to be leaking much (as in there are no visible drops on the ground yet). The car should still be fine to drive for now, right?

IMG_0698copy-1.jpg

Hey Dimi, you picked it up last week so it's still under warranty. Take it back and ask them nicely if they can rectify the problem? You didn't pay for a car with an oil leak so they should have no problem fixing it for you.

Hey fellas, appreciate all your help! :)

I think it is engine oil.

You might be right though. They might have fixed the leak already because it doesn't seem to be dripping at all.

So what i'll do is degrease it and sus it out after a good 100kms worth of driving. If the leak persists, i'll contact the dealer and ask them if they could rectify it. They should be cool about fixing up the leak, right?

I might give them a call today at lunch and ask them if they sorted out or noticed a leak before.

Edited by dimi108

Okay, so i degreased everything and took it for a good 100km drive.

I can now see more clearly where the leak is coming from.

The leak is there and i can smell it when the car is at idle with the fan on.

It's at this odd location just on top of the turbo.

What are your recommendations on this? Take it back to the dealer and ask them to help me rectify the leak? I've only had the car for 7 days.

IMG_0702.jpg

IMG_0714.jpg

IMG_0724.jpg

Edited by dimi108

My car is leaking slowly from the same spot, it is the rubber rocker gasket by the looks of it. They will probably order one in and fix it, you could of course get it yourself and fit it if the dealer isn't local.

I would change the plugs while you're there if they haven't been done already.

Yours is doing the same thing?

I see. Well at least i now know it's not an "impossible fix".

It seems like a slow leak on mine too.

How long has yours been leaking for Scott?

Edited by dimi108
What are your recommendations on this? Take it back to the dealer and ask them to help me rectify the leak?

this

pretty sure they have to fix it under the statutory warranty that you get from a dealer - 1 month and 5000(?) kms i think

How it passed a roadworthy with that much oil underneath, I have no idea.

I fixed mine myself as I didn't want the dealer touching anything else on the car... I should have bought a new seal though, instead I used silicone and it only lasted a few months.

Thanks fellas. I called them and they were nice about it. I'm going to go there this afternoon to have a chat then i'll leave the car with them on Sunday afternoon. Hopefully it doesn't take long to repair.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...