Jump to content
SAU Community

Rust: Do they salt the roads in Japan ?


Recommended Posts

I was wondering if they sale the roads in Japan during winter to avoid Ice on the roads ?

The reason I ask is if I need to carefully check the underside for rust on an import from the north of japan I am looking at.

Thanks

Mal

Link to comment
https://www.sau.com.au/forums/topic/32942-rust-do-they-salt-the-roads-in-japan/
Share on other sites

Guest RedLineGTR

From what i have heard yes they doing either with salt or some chemicals. But the best person to answer that is Rezz or someone in japan. You should check under the guards in general as well when looking for a car you just never know where rust can pop up. My 2 Cents

ive read somewhere from someone that lives on the lower slops of Mt Hirai, they get snow every year which makes driving dangerous.

Sometimes there are salt boxes put on the sides on the road but most people dont use that and just use snow chains. its more likely that they would pour water on the the road than spread salt. The major roads in snow vulnerable areas have fountain/spray systems fitted on the side on centre of the road.

Can't speak for the rest of Japan, but in Yamanashi where I am in snows plenty and they don't salt the roads. Instead, it seems like 90% of the road population head down to their local Autobacs, yellow hat, tyre shop whatever, and get a nice set of studless tyres on cheap alloys and run those during the winter months...

either that or chains, which can be a pain to put on and take off.

I lived up in northern Japan near Aomori for three years and they never salted the roads, hell we were lucky if they actually plowed the roads. As a result most of the roads were covered with packed snow and once it starts to melt it's like driving on a road covered with potholes, great way to screw up your suspension :P

I like most people just got a set of Bridgestone Blizzaks thrown on junkyard Silvia alloys and never really had much of a problem getting around. I'm just glad my old Cefiro had an LSD, really made a difference.

I've never heard of the local government putting salt on the roads in winter, even when I was up in the mountains in Mie, like Dave 'n the Fourty-one-fifty say, everybody just uses studless tires or chains if they're into S+M.

I think I can almost pinpoint this rumour to an article on Japanese Import cars in HPI magazine back in... eeerm... 1997/8. That retard Martin D***** blamed all the underbody rust on a certain Japanese import because of the "salt they religiously put on roads in winter in Japan"... or something to that effect.

Thanks guys,

I am always a bit wary of any car that has come from snow covered areas, but I had never heard of salting the roads in japan, I just wanted to make sure.

Thanks for the answers

Ta

Mal

I live in Mito, Ibaraki-ken and they salt roads here all the time. Not every road but places/stretches that are in the shade all day, bridges and stuff like that. Its not salt though, its some kind of very fine chemical dust type thing.

Musy be up to local government offices obvviously. Hope this helps:)

Afaik they do not used salt for melting snow in Japan they use anti-icing chemicals, snow fences, electric wiring and hot water under roads and sprinkler systems, avalanche hazard overpass structures (us local guys would have seen these around) etc. They are perhaps the most advanced country in snow control and winter maintenance which other countries look to follow. Let's not forget their frequent traffic updates.

This also extends to sophisticated snow control and maintence for rail cars, heated tracks, snow fences and sprinklers system all work together to keep the shinkansen running on time, only blizzards ever stop then running.

that retard martin d***** reads this forums and is a member LMAO :D
No sh!t?:D

Well, I saw him in Osaka 2 years ago... he was acting like a retard, yelling and jumping about infront of some RQs and general Japanese people while being videoed by a friend. He saw me looking at him, and he froze for a split second, then started behaving himself (prolly coz he realized he wasn't the only foreigner there). At that point, I was embarrassed to be a gaijin in Japan... I promptly legged it to try and distance my self!:zap: :bahaha:

ez mate, we all make mistakes!

I like most people just got a set of Bridgestone Blizzaks thrown on junkyard Silvia alloys and never really had much of a problem getting around.

GOD F****N DAMN IT!!!

The guys i met at the Dyno Day where right.... The dumbarse car dealer (Sydney - AUSTRALIA!) sold me my car with these tyre's on it! (ie BRIDGESTONE BLIZZAKS!)

F****N SNOW TYRES.... you're sh***ing me!?!?!?

I knew they didn't match the tyre placcard and i'm taking it back for them to fix it (but when i get there and they say no, i'll be taking it through the DOFT with everything else)... but i can't beleive this! are these even avaliable in australia or have they left them on when the car was imported?

jeez!!!!

(also: for safety's sake... what's the speed rating?)

Where I am, they have little sheds on the sides of the road in some places (usual steep hills). I've never looked inside, but I was under the impression that they contained a lime-based compound - not salt.

IMO, there is far less incidence of rust on cars in japan - than the rustboxes (even newer cars) that you see on any road in Australia.

DJ984: I use to thrash around in the dry with blizzaks on my mx5 - they actually weren't too bad at all, in terms of grip in the dry. I think the biggest downside is they are quite soft - and would wear very quickly. I think I have a set of blizzaks on my r33 at the moment - I'll check the speed rating later.

i know they're rated at Q but that's not even on the RTA website (not that the RTA is the be all and end all of reference points).... I was just curious (as stupid a question as it may be) if they are actually sold in Australia... or why the'd be on an R32 GTS-t sold in Sydney....?

but thanx man, that'd be great... :(

Q rating is 160km/h

They won't match the tyre placard - but so many aftermarket wheel/tyre combos won't - so good luck getting any help there.

It may be a compliancing issue - but that usually has more to do with dry tyres not meeting tread requirements - and if the seller didn't comply this actual vehicle... probably up to you to change them.

Why are they on your car? Well, I'll give the two most likely scenarios:

(a) Owner sold the car druing winter/just after winter and couldn't be stuffed putting the summer rims back on

(B) Owner had a nice set of aftermarket rims on the car and sold them separately (to Upgarage or someone similar). Most people use their original factory rims (or a cheap/2nd hand set of aftermarket rims) for the winter.

Are they sold in Australia? Very likely no (especially given the snow coverage of oz), as most people resort to chains when the ski season comes around.

DJ984, they have to change the tyres to an Aus approved tyre at compliance...take it back to the dealer and get real tyres, if they wont fix them have a chat to DOTARS about the bodgys.

Its good to see that I am not the only one that thought Martin D***** is a bit of a retard!!!!! His behaviour on the early HPI Vids made me embarrassed to be associated with skylines if this is what aussies do when making vids in japan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...