Jump to content
SAU Community

Recommended Posts

After installing my vg30 last weekend I might have to put the standard turbo back on due to the vg30 being a little noisy after some dyno time, I was just thinking that maybe i could high flow the standard turbo but would it be worth it? Or should i just take the vg30 of and high flow that?

I'm not after huge power either, around the 170-180 rwkw mark so i could prob get that from a standard rb25 turbo at around 12psi?

The vg30 only made 147.5 at 12psi so yea I think its a little tired.

yeah if you only want 180rwkw the rb25 in std form should be good for that on RB20

agreed, dont bother with the rb20 one, yuck... lol. took mine off to change the exhaust gasket and i dont understand how it can push 10psi throw it. lol.

As others have said if you're going to highflow, better off starting with something bigger (Neo has bigger exhaust housing than normal 25).

But if you only want ~180rwkw my RB20 made 183rwkw untuned through an RB25 turbo.

Your call but I think you'll find the VG30 turbos turbine housing a bit big for an RB20 , don't forget that a 3L is half as big again as a 2L and they make considerably more torque off boost as well .

I'm not sure if you are aware but the BB VG30 turbo actually uses a slightly smaller compressor wheel than the RB25 ones do - at least the R33 RB25 ones . If you try to fit the compressor housing off the VG turbo on an R33 RB25 turbo it won't go over the compressor wheel .

For a straight bolt on the R33 RB25 turbos are probably the go . They don't look it but the RB25's turbine housing passage is slightly larger than the RB20's one so I think a good try .

The OP6/VG30 turbine housing is a reasonable amount larger than the RB25's one , more than the difference between the 20 and 25 .

A .

I just installed a rb20 hi flow. so ill shed some light =)

First day i was very un impressed with power :whistling:

but after about a week i boosted it to 12psi and its pretty good.

Has no trouble frying 10" wheels on the back.

Response is amazing to!! By far the best thing about it :happy:

Iv driven rb25 turbo r32's. The hi-flow is defiantly better, But it cost 4x more so it would want to be better.

but at least you know its new and tuff. Not a 15 year old ceramic rape victim.

hyper gear (who rebuilt it, and is a legend by the way) have said it will make an easy 200kw.

Well its not the best turbo for the money. But its still going to be more fun than a vg30 hi flow.Yuck.

I recon choose between rb25 stocky. Or rb20 hi flow if you got the cash. F**k the vg30.

good luck =)

  • 3 weeks later...

dragging this up but anyway.

a race car i have worked on for the past few years started life with a r33 GCG hiflow. laggy as hell. made about 240rwkw on an rb20.

it failed and joined the list of failed ones i know of. GCG said it would cost just as much as it originaly did to get it rebuilt

in the mean time put a stock rb20 turbo back on and changed the car 100% the bloke was wrapped with having response again.

so we got a rb20 turbo hiflowed by precision turbos. it was also cheaper. put it on and its grate. highly recomended. spools fast and makes 220rwrw. comparison on dyno graph shows it drops off at the top but better every where elce.

also getting a turbo hiflowed by billet turbos in the next few weeks for another car. they wheel specks are the same as the HKS 2530 going in to a rb20 turbo.

as far as stock turbo bolt ons on my own car i have run a neo rb25 turbo and it was grate. they are noticable better than the r33 turbos. i run a r33 turbo on my street car and after doing a swap between a stock rb20 turbo and the r33 turbo i found it has a few hundread rpm more lag and far better top end.

I'm not after huge power either, around the 170-180 rwkw mark so i could prob get that from a standard rb25 turbo at around 12psi?

yes, easily. no need for high flowing it. high flowing will hurt low end response. i had an Rb25 turbo (the later one with nylon compressor wheel) on my RB20 and it still boosted up nice and low, and was good to drive. Not quite the same response as the smaller RB20 turbo but there was more headroom.

I have a gcg highflowed rb20 turbo, the specs are basically identical to their highflow rb25 turbo, just slightly smaller housing I think but they bore it out to around the same.

It is on an rb25 but it is on full boost by 3500rpm and has made about 6-7psi by the high 2000s.

Very responsive and makes over 200kw on just 10psi, expecting about 240 on 16+

On the rb20 I would do as the others have suggested and stick with a stock rb25 turbo, anything much bigger and you will be sacrificing response for top end, won't be much fun to drive.

  • 1 month later...

im a bit confused by power quoted here. I have a R32 Gts-t with a highflowed turbo and I only get 220kw at 19psi running 104 oct race fuel. on pump it only has 200kws

has 444 inj, 040 pump, jjr coilpacks, apexi ecu, z32 afm. I was thinking of getting a R25 turbo highflowed so i could have more power and maybe less boost.

Find a new tuner imo

if its an rb20 turbo with a sleeve bearing then its possible it just has steel wheels and is barely bored out. I've got a highflowed rb20 turbo on a 25 making only 240kw on 18psi, depends on the housing, the bearings and the trim wheel used.

not to mention how much dynos can vary.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...