Jump to content
SAU Community

Recommended Posts

Hey.

So ive got a r33,rb25det..

Just installed bigger turbo,the closest i can compare to would be garret 3071r.

Power fc

external 38mm turbosmart ultragate

Z32 afm and 580cc injectors...

After a huge f**k around with getting it tuned,when i was assured i would have it back same day,it finally got done.

Got 326.6hp at wheels..boost is spiking at 18,and droping back to 15 by redline..

Quote for tune was $500,ended up costing $750.

Now after driving the car around for a few weeks,im noticing it kind of hesitates sometime when light on the throttle,seems to cold start fine,but then other random times it cranking over for 10sec or more and just coughing to life..hot or cold..

Also had to wind the boost down the other day as engine light had been flashing on,and was advised it was detonating..

I know the car's not perfect,but think it mite be worth my while getting the tune looked at by someone else..

Im living near newcastle..so anywhere around here or sydney..

Also any advise is also welcome

cheers

Edited by dilfukin
Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/
Share on other sites

What turbo precisely? It seems like there is more to the story.

I would spend more time talking to your tuner before getting too far ahead. Ask more questions about why the car seems to be pinging, why it is hard to start etc.

If you have done this then what was their response?

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384437
Share on other sites

yes common sense prevails here please

far too often we see people go get a tune, and any tiny isssue is a mega 6 page thread about the workshop being crap and a rip off before the guy spends 5 minutes talking to the workshop / tuner. please discuss with the workshop and let them address the issues. if you dont want to go back to them, goto another workshop for a 2nd opinion

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384475
Share on other sites

have a look on your powerfc at the knock/detonation. mine never goes above 20 on 98 oct but when i have only been able to get 95 oct it has gone up to 60-80ish. think the light comes on at 100 or more from memory. make sure you have low numbers

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384612
Share on other sites

turbo is a billet...i rang mr turbo on the goldcoast to try and track down the exact specs of the turbo,he said it would have similar spec wheels as a garrett 3071r... with .63 rear housing

I cant check knock as i dont have a hand controller for the computer,which was a problem in its self as tuner said his software wouldnt recognize my computer,saying it must be too old,so i borrowed a hand controller so he could tune it,which he did through the controller..

Boost is spiking because of crap bleed valve..two ways of fixing that is:1. another spring in the wastegate to run 18psi,or 2 get an electronic boost controller...?

Im not naming the tuner as i dont know for sure it's a tune problem....

Cheers

Edited by dilfukin
Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5385639
Share on other sites

my GTR has to be tuned with the hand controller too, trust me my tuner HATES doing it with the hand controller but the datalogit doesnt connect with all POWER FC's. mine is an older model FC i think.

nothing wrong with tuning with the hand controller its just more time consuming and more fiddly going in and out of menu's

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5386844
Share on other sites

hand controller tuning is fine and has been the std for god knows how long?

its only in the last few years workshops have got onto datalogit as mainstream

datalogit makes it quicker and easier (less cost) and lets you be a bit more picky

but there would be hundreds of well setup quick cars with hand controller tunes

go back to the place who tuned it

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5386846
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...