Jump to content
SAU Community

Recommended Posts

Hey.

So ive got a r33,rb25det..

Just installed bigger turbo,the closest i can compare to would be garret 3071r.

Power fc

external 38mm turbosmart ultragate

Z32 afm and 580cc injectors...

After a huge f**k around with getting it tuned,when i was assured i would have it back same day,it finally got done.

Got 326.6hp at wheels..boost is spiking at 18,and droping back to 15 by redline..

Quote for tune was $500,ended up costing $750.

Now after driving the car around for a few weeks,im noticing it kind of hesitates sometime when light on the throttle,seems to cold start fine,but then other random times it cranking over for 10sec or more and just coughing to life..hot or cold..

Also had to wind the boost down the other day as engine light had been flashing on,and was advised it was detonating..

I know the car's not perfect,but think it mite be worth my while getting the tune looked at by someone else..

Im living near newcastle..so anywhere around here or sydney..

Also any advise is also welcome

cheers

Edited by dilfukin
Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/
Share on other sites

What turbo precisely? It seems like there is more to the story.

I would spend more time talking to your tuner before getting too far ahead. Ask more questions about why the car seems to be pinging, why it is hard to start etc.

If you have done this then what was their response?

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384437
Share on other sites

yes common sense prevails here please

far too often we see people go get a tune, and any tiny isssue is a mega 6 page thread about the workshop being crap and a rip off before the guy spends 5 minutes talking to the workshop / tuner. please discuss with the workshop and let them address the issues. if you dont want to go back to them, goto another workshop for a 2nd opinion

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384475
Share on other sites

have a look on your powerfc at the knock/detonation. mine never goes above 20 on 98 oct but when i have only been able to get 95 oct it has gone up to 60-80ish. think the light comes on at 100 or more from memory. make sure you have low numbers

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384612
Share on other sites

turbo is a billet...i rang mr turbo on the goldcoast to try and track down the exact specs of the turbo,he said it would have similar spec wheels as a garrett 3071r... with .63 rear housing

I cant check knock as i dont have a hand controller for the computer,which was a problem in its self as tuner said his software wouldnt recognize my computer,saying it must be too old,so i borrowed a hand controller so he could tune it,which he did through the controller..

Boost is spiking because of crap bleed valve..two ways of fixing that is:1. another spring in the wastegate to run 18psi,or 2 get an electronic boost controller...?

Im not naming the tuner as i dont know for sure it's a tune problem....

Cheers

Edited by dilfukin
Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5385639
Share on other sites

my GTR has to be tuned with the hand controller too, trust me my tuner HATES doing it with the hand controller but the datalogit doesnt connect with all POWER FC's. mine is an older model FC i think.

nothing wrong with tuning with the hand controller its just more time consuming and more fiddly going in and out of menu's

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5386844
Share on other sites

hand controller tuning is fine and has been the std for god knows how long?

its only in the last few years workshops have got onto datalogit as mainstream

datalogit makes it quicker and easier (less cost) and lets you be a bit more picky

but there would be hundreds of well setup quick cars with hand controller tunes

go back to the place who tuned it

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5386846
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...