Jump to content
SAU Community

Recommended Posts

  • Replies 381
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I think you're the one being harsh. Where did I blame the organisers? I merely asked how lap times could have been messed up so badly as clearly Josh's Starlet at the level it's at is not capable of 1:12's. Had I come in and said....

"Wow, that's crazy, the organisers must have been watching TV instead of the track all day"

You would have had grounds for your comment. If you flare up over the smallest little comment, especially not directed at you, perhaps you should listen to your own advice? I don't take kindly to being told to shut my mouth when nothing offensive has come out of it

That being said, thanks for organising a fantastic day, I had a blast as I'm sure everyone else who attended did! Was great to see such a broad range of Skylines out there on the day

It's so easy to get worked up over the internet, when you can't hear the tone in which a comment is written. I apologise. When you typed, "How did "They" mess that up so badly,", I took it to mean that you meant the organisers, because we were the ones running the timing. We purchase the timing system the week before the event, because for a whole heap of reasons I won't go into here, we couldn't get other timing. So the team had to learn new software, as well as tackling numbers that were not all in the same spot on the cars, so by the time the car number was identified on some cars, others had gone through, and it was too late to then time the that was the one being researched.

This was our best Nats ever, and after travelling back home with cars and trailer today, I am exhausted, no excuse.

If we ever have a track day at Mallala again, we will do a whole lot differently, but thats not meant to take anything away from what a great day it was.

We would hire Adam Ronke's team to get the sign in, scrutineering and categories done. This had to be left up to the CAMS officials, who insisted on running the event, as we did not have any CAMS registered officials. We should have been out on the track at 9.30 or 10 at the latest, if the program had of been run the way we wanted it. We were told on the day, that basically, what we wanted wasn't important.

Not going to go any further into that.

There are so many people who helped, and who were so generous in their time and support, including Tim from the MG Car CLub, and Chris Anderson.

I am really looking forward to my next track day, and I hope everyone in here is too.

malalla is certainly "interesting" scrutineering wise..... only place they "make up regs on the spot"....

Cant wait for wakefield, shame Garry Willmington no longer runs the show but we will drag a few cars over to it, i was unable to go this year. ;)

we should have the times up in the next day or too, ill pop a link up as soon as i have it,

the only 1.12 i saw on the final official time sheet was a R35 GTR......

malalla is certainly "interesting" scrutineering wise..... only place they "make up regs on the spot"....

Cant wait for wakefield, shame Garry Willmington no longer runs the show but we will drag a few cars over to it, i was unable to go this year. ;)

welcome to south australia my man ;\

nanny state extreme

-D

martin, for reference:

we should have the times up in the next day or too, ill pop a link up as soon as i have it,

the only 1.12 i saw on the final official time sheet was a R35 GTR......

SAU SA cleaned up with trophies, as per my post on previous page. We will get these out to their respective owners over the next few days. Was a shame that only a two, out of the 10 trophies awarded to SAU had their owners at the dinner.

And there is no malice in that comment either guys ;)

eagerly waiting on the timing list and show and shine trophy list!

Just from standing at turn 1, the feel i got was Keir was probably the quickest, followed pretty close by RH9, was Martin driving?

Just from standing at turn 1, the feel i got was Keir was probably the quickest, followed pretty close by RH9, was Martin driving?

No I wasnt driving RH9 on the day. My people had a talk with the Willall people and we were unable to reach a suitable remuneration and contract package for the event so we decided it was in my best interests to sit this event out in lieu of compromising other upcoming offers and negotiations we have on the table :blink:

Seriously, it was Kurt Wilson driving RH9, he is the Willall designated R32 driver and did what we consider to be an excellent job :(

I find that car a bit scary ;)

No I wasnt driving RH9 on the day. My people had a talk with the Willall people and we were unable to reach a suitable remuneration and contract package for the event so we decided it was in my best interests to sit this event out in lieu of compromising other upcoming offers and negotiations we have on the table :blink:

Seriously, it was Kurt Wilson driving RH9, he is the Willall designated R32 driver and did what we consider to be an excellent job :(

I find that car a bit scary ;)

I'm sure Kurt would agree with you after it got away from him coming onto the front straight. He did a great job of steering the angriest sounding car at the track.

Thanks to the Willall team for bringing out the 35 and the 32. Awesome

Munro's R33 was pretty wild as well. Beautiful workmanship on every part of the car.

Great weekend all around.

Were there any trophies or whatever for the circuit day?

(Kind of missed any presentation as we had to load the cars etc.)

On that note Martin, I need to catch up with you guys in the next couple of days.....................also to talk about my car ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...