Jump to content
SAU Community

Recommended Posts

search engine doesnt let you search for "1/4" so everyone put drag times here

spent 2 hours looking another topic

drag 1-4 quartermile 0-400 et

heres mine form yesterday .never dragged aything before

run 1 2 3 4 5

reaction 0.415 0.637 0.281 0.521 0.673

60 ft 2.31 2.29 2.30 2.06 2.16

et 14.56 14.34 14.40 14.10 14.06

mph 96.95 97.10 97.34 96.68 96.89

fat f**kin wagon . itll go better when i get it tuned and a real clutch

Link to comment
https://www.sau.com.au/forums/topic/332999-stagea-drag-times/
Share on other sites

Calder park, first time out. M35 Stagea with full tank and street trim. (I only took the baby seats out. :) )

Average reaction time 0.5 seconds

Average 60 foot 2.5 seconds

Best 1/4 time of 13.5 seconds at 171kph due to factory speed cut.

Vids:

I will have to go back now I have disabled the speed cut, hoping to crack into the 12's.

Ok back in feb @ Calder Park

Run

1. R/T:- .692 60Ft:- .000 1/4 Mile:- 16.697 MPH:-85.55 KM/H 137.69

2. R/T:- .620 60Ft:- 2.416 1/4 Mile:- 15.959 MPH:-85.51 KM/H 137.62

3. R/T:- .657 60Ft:- .000 1/4 Mile:- 15.747 MPH:-85.34 KM/H 137.35

4. R/T:- .599 60Ft:- .000 1/4 Mile:- 15.693 MPH:-85.97 KM/H 138.36

5. R/T:- .638 60Ft:- .000 1/4 Mile:- 16.066 MPH:-84.69 KM/H 136.29

6. R/T:- .683 60Ft:- 2.195 1/4 Mile:- 15.580 MPH:-85.93 KM/H 138.30

7. R/T:- .600 60Ft:- .000 1/4 Mile:- 15.531 MPH:-85.55 KM/H 137.69

8. R/T:- .686 60Ft:- 2.168 1/4 Mile:- 15.428 MPH:-87.69 KM/H 141.12

9. R/T:- .712 60Ft:- .000 1/4 Mile:- 15.412 MPH:-87.81 KM/H 141.32

10. R/T:- .658 60Ft:- .000 1/4 Mile:- 15.232 MPH:-88.85 KM/H 142.99

the .000 60 Ft time was because the right markers were not working

pretty happy with this.. once i have some cash on my side i will bemaking mods but untill then.. :)

Fastest was the last run of the night.

and run 5 wass because i forgot to turn the air con off for that run.. :D

Calder park, first time out. M35 Stagea with full tank and street trim. (I only took the baby seats out. :D )

Average reaction time 0.5 seconds

Average 60 foot 2.5 seconds

Best 1/4 time of 13.5 seconds at 171kph due to factory speed cut.

Vids:

I will have to go back now I have disabled the speed cut, hoping to crack into the 12's.

Watched your vids, this thing really does get a shift on! Can't wait for higher terminal speed!

Pfft, Commodores, probably thinking "Shit, what kind of V8 does he have in that Volvo, I need more NOS!"

  • 2 months later...

11.33 @ 124mph on street tyres and full weight (1740kg + driver roughly)

Im tempted to test out the new setup (26/30 and 3076r turbo) but clutch doesnt like the power at moment, so until i swap it i wont be seeing any drags, plus i got a bigger turbo (gt35 1.06 twin scroll t4 flange) to go on too if i can be bothered swapping it over.

Well after a hot arvo of 32deg at Willowbank Raceway, I did got 5-6 runs and the clutch started to over heat

Parked it to cool down so I could make the 80-90km trip home.

Run number 3 was the best.

328rwhp

Run1

60ft 2.250

1/4 13.853

mph 101.01

k/mh 162.55

Run 2

60ft 1.960

1/4 13.681

mph 100.76

k/mh 162.15

Run 3

60ft 1.981

1/4 13.545

mph 101.83

k/mh 163.88

Run 4

60ft 2.386

1/4 14.3

mph 99.46

k/mh 160.08

Run 5

60ft 2.158

1/4 13.648

mph 102.66

k/mh 165.21

Edited by darrinspencer
nice work darrin, how does the GT30 go launching the stagea off the line? are you still running on the tune you got back in May/June?

Same tune, hence the 328hp, not the 400rwhp it is capable off.

The launch is had to get right. the weight of the car, with AWD grip puts alot of load on the clutch as I found out.

Not enough revs and it bogs down, too much stinks like hell.

Had to slip it off the line at around 3-3500 rpm.

Same tune, hence the 328hp, not the 400rwhp it is capable off.

The launch is had to get right. the weight of the car, with AWD grip puts alot of load on the clutch as I found out.

Not enough revs and it bogs down, too much stinks like hell.

Had to slip it off the line at around 3-3500 rpm.

What kind of clutch do you have ...single plate??
What kind of clutch do you have ...single plate??

Yeah single organic sprung centre, suppose to be good for 300rwkw. Pretty to drive on the street, esp since I do 80km a day going to work

It is built by Race Clutch (Jim Berry) very well regarded in OZ

Will have to find a streetable twin plate maybe

Have an Rb30 in the planning.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...