Jump to content
SAU Community

Recommended Posts

From my reading the threads over the last few weeks and elsewhere:

Royal Purple Oil would be at or near he top for racing/high perfomance driving and would tend to be changed frequently.

For Normal city Highway driving and extended oil changes BP Visco 5000 at about 60% of the price would be better/ a more sensible choice.

I will probably do 10,000km oil changes with BP Visco 10w 30w depending on the type of driving and feed back here for an M35 series 1 Stagea.

if money was no object then Amsoil would work in both situations but tends to be double the price of BP Visco 5000.

On the basis of price I wont be using Amsoil .

I realise if I use the best I will be keeping my engine in better nick but I think that has been discussed in other threads. I dont want to go down that path in this thread.

I know I wont get a definite answer but is this fairly close to correct.

Edited by samuri

gulf western s6000 sougi

group 5 ester based full synthetic which is on par with motul 300v chrono

but the GW is only $60 from a distributer (call gw to find one in your area)

check out the 'goods on oils' thread in the general maintenance section

gulf western s6000 sougi

group 5 ester based full synthetic which is on par with motul 300v chrono

but the GW is only $60 from a distributer (call gw to find one in your area)

check out the 'goods on oils' thread in the general maintenance section

'goods on oils' was read thoroughly but I believe a lot of responses are from those who race and use oil for extreame race condtions rather than normal driving . They then use the oil for a short duration .

I am not so concerend about getting the individusal best oil but concerned with sticking to the post topic.

This is my second attempt to attach a pole for this thread .

Off their website:

Sougi S 6000 offers:

- Full synthetic formulation providing the ultimate engine protection

- friction modified for reduced engine wear

- Proven Field performance

- Increased horse power

- Excellent shear stability performance is maintained. and very high thermal/oxidation stability provide long fluid life.

- Suitable for vehicles using Petrol, LPG and Alcohol fuels

Seems like it's fine for ethanol or Methanol...

if money was no object then Amsoil would work in both situations but tends to be double the price of BP Visco 5000.

On the basis of price I wont be using Amsoil .

Agreed with Scotty, the Sougi S6000 is top of the list in my books.

The car feels more "together" than any other oil I have used bar the 300v (had the same "feel") and has quick rattle on cold start unlike with Redline oil.

I tried a lot of different oils early on, but used Motul 300v or Redline for the past year and a half or so (I can't understand why anyone would skimp on oil of all things!).

I did use Amsoil 10W40 but didn't feel it was any better than Mobil 1 or Shell Helix Ultra

hmm... if you must go with Amsoil you should be able to get just under 5L of Amsoil 10W40 for around $80 or less, not a steep price to pay for a grade IV oil.... although I can't imagine why you would when you can get the Sougi S6000 (Grade V oil) for around $60.

+1 to sougi

i run it in the stagea and its my daily

dunno why you wouldn't use it, its the same price as nulon syn and lasts at least twice as long (had nulon in b4 the sougi and it got noisy at about 5000 kms)

I run Royal Purple. I know a few others do too. Aprox $100 dollars from autobarn. Doesn't have to be changed more often...Although I do a change around every 5000k.

Awsome stuff...when I put it in the Stag it ran smoother and slightly quieter.

Have a look at this artical. Its old but an interesting read.

http://www.royalpurple.com.au/article_imag..._supplement.php

  • 2 weeks later...
gulf western s6000 sougi

group 5 ester based full synthetic which is on par with motul 300v chrono

but the GW is only $60 from a distributer (call gw to find one in your area)

check out the 'goods on oils' thread in the general maintenance section

I rang GW in Penrith and they want $75 for 1 bottle! Is this correct? Wondering if anyone knows of any cheaper suppliers/retailers in western Sydney, preferably Blacktown/Penrith areas

cheers

GW is in Sydney so you should be able to get it cheaper than me, I got 4 bottles for $220.

Autobarn were asking $80 a bottle.

I had to ask the guy on the phone twice, because $75 didn't sound right to me. That's directly from gulf western too. I wonder if you can buy more and get a discount?

I had to ask the guy on the phone twice, because $75 didn't sound right to me. That's directly from gulf western too. I wonder if you can buy more and get a discount?

Whilst it is a little more than what we seem to get it for in Vic... $75 for a Group V oil is bloody fantastic anyway!

Think of it this way, how would you react if you found out that your local Autobarn was selling 5L bottles of Redline 10w40 or Motul 300v Chrono at $75

EDITED :D

Edited by iamhe77
Whilst it is a little more than what we seem to get it for in Vic... $75 for a Group V oil is bloody fantastic anyway!

Think of it this way, how would you react if you found out that your local Autobarn was selling 5L bottles of Redline 10w40 or Motul 300v Chrono?

Mine does, but not at that price...

They didnt know what Sougi was. :D

if your getting it straight from gw then they are probably charging you rrp

check with a distributer, they should sell it to you at wholesale price, i.e. the price that autobarn etc pays for it

using either royal purple 5-30 or 10-40 .. 5 - 30 is slightly lifter knocky as its a bit too thin.

finding the 10-40 a better ratio.

although ive also used motul 300V competition .. around the same price $100 for 5 litres. and is slightly quieter on the lifters.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...