Jump to content
SAU Community

Recommended Posts

Ahh true true....

I'd prolly connect it to my phone :S

In and around the capital cities that should be fine, but when you're driving out of the main cities you'll struggle for bandwidth/signal if you't not with on Telstra (in my experience at least) - and then you'll have no maps domokun.gif

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

It looks good. I like that aux and power cables are hidden and you cannot really see any wiring...

I'm looking at doing the same and was leaning towards 7 ''iMito or Optus Tab. I probably will reconsider tha.... built in GPS , 18cm H and hidden wiring made your unit the best option...

Well done!!

pics attached :)

Has GPS, bluetooth, WIFI etc.

Loving it. Angry Birds, Internet, Divx, SatNAV, Gsensor (0-100 times etc) Anything Android can do so can this tablet.

link:

http://www.merimobil..._p/meri0306.htm

Running headphone to the Line IN on the back of the stereo. Works a treat.

In and around the capital cities that should be fine, but when you're driving out of the main cities you'll struggle for bandwidth/signal if you't not with on Telstra (in my experience at least) - and then you'll have no maps domokun.gif

newest version of google maps does route caching - you tell it where you want to go while you have reception, it caches all the route data for you so you can travel without the need for more data. i presume it falls over if you need to re-route.

ymmv, but i've never had issues with google maps using too much bandwidth and i'm on three...

In and around the capital cities that should be fine, but when you're driving out of the main cities you'll struggle for bandwidth/signal if you't not with on Telstra (in my experience at least) - and then you'll have no maps domokun.gif

Hmm, weird. When I bought my M35 from Sydney and relied solely on my HTC Desire's google maps to bring me back to melbourne. All the way down I don't recall losing GPS reception at all and I'm with Three which probably roams onto Telstra.... The phone uses an A-GPS..

EDIT: Doh too slow...cha cha answered it for me :pirate:.

Edited by ironpaw

Hmm, weird. When I bought my M35 from Sydney and relied solely on my HTC Desire's google maps to bring me back to melbourne. All the way down I don't recall losing GPS reception at all and I'm with Three which probably roams onto Telstra.... The phone uses an A-GPS..

EDIT: Doh too slow...cha cha answered it for me :pirate:.

I definitely had issues with signal when doing Adelaide -> Falls Creek last year; I used my N96 for GPS (it does/did NTSC video out to my in car screen worship.gif) with offline maps. A friend who tours with a band also suggested not relying on phones for GPS as the maps fall over in the middle of nowhere (Where you often need it most). Im with Three also, I may just be overly cautious! I dislike getting lost :P

Im thinking my next phone just needs to be able to do NTSC video out via svideo and that should keep me happy for a bit longer - my current android phone (Motorola Milestone) lacks this feature :(

Im thinking my next phone just needs to be able to do NTSC video out via svideo and that should keep me happy for a bit longer - my current android phone (Motorola Milestone) lacks this feature :(

for the record, the samsung galaxy s will do it (NTSC) via the nokia 3.5mm -> 3x RCA cable, but the output isn't perfect - although i've heard of others getting perfect results, my phone has a pretty noticeable hum going on when video out is enabled so the RCA audio quality is very, very poor. regular audio (ie, 3.5mm with the tv-out option switched off) sounds great though.

the next round of phones (like the sgs 2) will come with hdmi outputs via microusb so my plan is to grab one of them and downgrade the output to composite before i plug it into my tuner...

as for google maps, i haven't had those sort of problems since the last big update a few months ago, but yes, it was very frustrating. i'm more annoyed when it makes up routes or sends you in loops for no reason though... i think you certainly get what you pay for, but in my case the price is right.

Edited by cha_cha_

I have a work phone with 3.

I think they are terrible considering I can't get service in my house sometimes and I am in the middle of Adelaide suburbia, 15km from the CBD!

I didn't know GPS was free, cheers for that. I would probably go the offline route as I find the phone unreliable, $50 is pretty cheap and discounted prices from google cough :whistling: may be even cheaper.

Good thread, lots of food for thought so far.

Edited by jidge

It looks good. I like that aux and power cables are hidden and you cannot really see any wiring...

I'm looking at doing the same and was leaning towards 7 ''iMito or Optus Tab. I probably will reconsider tha.... built in GPS , 18cm H and hidden wiring made your unit the best option...

Well done!!

Just got myself a Optus Tab, for $199 with 3Gb allowance it was hard to not buy it... Loving it, has GPS, with Beta Nav software, WiFi and 3G connections. Got it working with my work and personal e-mail in about 5 minutes. Daughter has her wiggles videos on it, and loves playing Angry Birds (or naughty cops as she calls it). It even has a radio on it and I could connect it into the car for music etc using the AUX inputs on the PA-15.

Looks like I can get a headrest bracket for her on the bay so she can use it as a DVD for long journeys and battery is way better than any portable DVD I have seen so far..

Just got myself a Optus Tab, for $199 with 3Gb allowance it was hard to not buy it... Loving it, has GPS, with Beta Nav software, WiFi and 3G connections. Got it working with my work and personal e-mail in about 5 minutes. Daughter has her wiggles videos on it, and loves playing Angry Birds (or naughty cops as she calls it). It even has a radio on it and I could connect it into the car for music etc using the AUX inputs on the PA-15.

Looks like I can get a headrest bracket for her on the bay so she can use it as a DVD for long journeys and battery is way better than any portable DVD I have seen so far..

Just read the optus terms for the Tab. Data in 10mb increments and has to be used in 3 months ... :(

  • 2 months later...

picked up an Optus Mytab since they're selling them for $99 for the last week or two.

Going to mount it up front using this:

http://www.ram-mount...85/Default.aspx

and this: http://www.ram-mount...85/Default.aspx

Going to run Torque on it.

Question is...will the Scantool http://www.scantool....-bluetooth.html be compatible with our car? It claims to be compatible with all makes from 96-present...

going by this: https://www.scantool.net/support/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=3&nav=0 can anyone tell me whether our OBD2 ports will work with this tool?

Edited by ironpaw

I doubt it will work, I have tried most of the obd2 software and couldn't get any of them to communicate.

Ah well, its only $150 and they provide 90 days money back guarantee...gonna try it.

They claim it does JOBD...I'll see if it works...

Does our car use a straight or right angle connector?

Edited by ironpaw

Does our car use a straight or right angle connector?

I think it's straight, but just pop it out & have a look . It'll take longer to open the car door than it will to drop out the connector from under your steering wheel :rolleyes: .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...