Jump to content
SAU Community

Recommended Posts

vaccum line gaffa taped into the end of your mums vacuum :D stick vac line into plug hole works a treat.

sound awesome mate thanks ....my mate was saying put gaffer tape round the throttle body with a vaccum line and take the exhaust manifole side off and blow it out will that work ....i havent started the car since it happend so im hopen it will be ok

Dont start it,suck it out with vacume cleaner.I learnt this the hard way,glad i was there when it happened at a work shop,trust me you don't want to know what it sounds like when the key is turned on,horrible by by engine. :D

Dont start it,suck it out with vacume cleaner.I learnt this the hard way,glad i was there when it happened at a work shop,trust me you don't want to know what it sounds like when the key is turned on,horrible by by engine. :D

geez i could imagine ......now what if there is a small bit i dont suck up for instance will it cause damage to the motor ...

Yes. You dont want any bits left behind ideally.

How did you manage it anyhow? gapping the plugs incorrectly?

anyway to know if its all out ??/ nope me being me just lseng them and thene pulled it out and im like wtf!!! but i heard some crap bout a porclian magnet or something.....i might try both ways to make sure its all out turbo off intake bloked hose in the throttle body blow it out with the compressor?

my mate had this happed, he thought he had it all out and bam, wrecked motor. He went to great lengths to get it all out too. Vac, etc.

Maybe a borescope mate?

+1 for having a really good look before you start it up.

Cheers,

SW

A bore scope is an optical device that you put down the spark plug hole to inspect the bore with, sort of like a camera.

There expensive and probably not something you buy for a one off excercise. You may be able to borrow one but.

Lay off on the torque next time you put them in. :)

One thing you could to to make sure you got it, is throw a stocking over the end of one of the vacume pipes when you put them together, that way it will still flow air, but the bit of the plug will get caught in the stocking.

vaccum line gaffa taped into the end of your mums vacuum :) stick vac line into plug hole works a treat.

Been there done that huh, lol

How busy are you would like to get a tune done around the 22nd, 23rd, 24th.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...