Jump to content
SAU Community

Recommended Posts

skids!

This does look fun!

I am pretty interested in coming and taking my new silvia for a spin, but havnt done anything like this before so am a little nieve about a few things. With the "All cars must have an insurance approved fire extinguisher secured within drivers reach" what are the 'approved' fire extinguishers and do places ususlly sell them with a bracket able to be secured somewhere or do you have to get one made up?

Im assuming my typical duct tape/cable tie method of securing most things would not be acceptable :)

  • Replies 189
  • Created
  • Last Reply

Top Posters In This Topic

i keep lovin that photo matt :D

This does look fun!

I am pretty interested in coming and taking my new silvia for a spin, but havnt done anything like this before so am a little nieve about a few things. With the "All cars must have an insurance approved fire extinguisher secured within drivers reach" what are the 'approved' fire extinguishers and do places ususlly sell them with a bracket able to be secured somewhere or do you have to get one made up?

Im assuming my typical duct tape/cable tie method of securing most things would not be acceptable :)

Hey man;

Autobarn has them for about $30; they come with a bracket. what I've done is used the bolt that holds the tab down on the passenger side of the back seat, kinda hard to explain, i'll take a photo tonight. I've bolted that in tight, so if need be, unclip and bang, extinguisher.

You'll also need a helmet, I put links in this thread for an eBay guy selling them; about $100 inc shipping, or you can see MCAS or similar so you can try one on first.

ASAA/CAMS L2NS license also required, $50 I think for a year?

So to sum up, from having nothing to entering texi the first time:

$30 - Extinguisher

$100 - Helmet

$50 - ASAA/CAMS

$70 - Texi entry (or $50 if you're an SAUNSW member, but we'll go with 70 for now)

So first time it'll cost $250 plus fuel, but after that, just the entry fee plus fuel. Plus tyres. :) Keep in mind, those 18's I'm running in that pic still have a ton of tread on them; guess I didn't go hard enough, but I thought I did :rofl:

Oweban, you went soft as... Epically soft since you wouldn't let me drive it! :)

Even Mel, Dave and Eric handed over keys... :)

PS, Looks like after a 10hour flight, I will be driving to Canberra just so I can make it back to Texi at 5AM the next morning...

Big ups to Sean for a lend of a car! :D

Hey man;

Autobarn has them for about $30; they come with a bracket. what I've done is used the bolt that holds the tab down on the passenger side of the back seat, kinda hard to explain, i'll take a photo tonight. I've bolted that in tight, so if need be, unclip and bang, extinguisher.

You'll also need a helmet, I put links in this thread for an eBay guy selling them; about $100 inc shipping, or you can see MCAS or similar so you can try one on first.

ASAA/CAMS L2NS license also required, $50 I think for a year?

So to sum up, from having nothing to entering texi the first time:

$30 - Extinguisher

$100 - Helmet

$50 - ASAA/CAMS

$70 - Texi entry (or $50 if you're an SAUNSW member, but we'll go with 70 for now)

So first time it'll cost $250 plus fuel, but after that, just the entry fee plus fuel. Plus tyres. :laugh: Keep in mind, those 18's I'm running in that pic still have a ton of tread on them; guess I didn't go hard enough, but I thought I did :P

Thanks heaps, Ill go check out autobarn and if you can send me a picture that would be awesome. I have a helmet already because I ride motorbikes, and have a few spair tyres lying around from my GTS-T which should fit the silvia too, so it shouldnt be too expensive for a first time event :D

This does look fun!

I am pretty interested in coming and taking my new silvia for a spin, but havnt done anything like this before so am a little nieve about a few things. With the "All cars must have an insurance approved fire extinguisher secured within drivers reach" what are the 'approved' fire extinguishers and do places ususlly sell them with a bracket able to be secured somewhere or do you have to get one made up?

Im assuming my typical duct tape/cable tie method of securing most things would not be acceptable :laugh:

Hey mate good to hear you finally got past the EPA. Narimba is about 5mins from where you borrowed the stock exhaust off my mate.

I'm trying to get him to take his car too so you might not be the only s15

Hey mate good to hear you finally got past the EPA. Narimba is about 5mins from where you borrowed the stock exhaust off my mate.

I'm trying to get him to take his car too so you might not be the only s15

Hey, Yeh I'm all passed and ready to go thanks heaps for hooking me up with that exhaust I owe you! Just went and got my fire extinguisher so im really keen now, hopefully ill see you and your friend out there :laugh:

Aww bugger. I'm planning on doing filming instead of running.

So I'll drive your car and you can tell everyone that you were driving ;)

..... or I can film you when you do your runs either way is cool :thumbsup:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...