Jump to content
SAU Community

Recommended Posts

Beer Baron, I didnt think they would cost that much. My budget is around the $65k mark, although for something as clean as the first one I could maybe budge a little. Dont think I could justify spending that much on a GTR. Do you know any other sites to visit where I can find some nice cars for import?

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Todd and Yumi (Edit* via Kristian) have a nice VS I (not VS II though, that you were asking about), coming in next month + warranty.

From Nara prefecture, no rust, no damage, modified 550ps, white, full service history.

With RAWS requiring virtually stock standard cars to be signed off, how does one get these more modified examples through without major time invested (assuming you can source stock parts).

Someone somewhere is fudging something!

IMO, a modded car ex Japland may appear value, but certainly not if you need to go to hell and back to have it complied correctly, as a friend who recently bought a 34R in and had to swap out (and find first!) a standard 34R dash because his had gauges inset into it. The cost of such works ads up quite quickly..... and you still haven't seen or driven it to actually know if its a good one!? lol

^^^^get a load of THIS guy!

haha nah just tricking...

it's a bit of a catch22 (i think that's the saying?)

cars have to be brought back to standard for compliance...

...yes and "no"

yes - it is a federal requirement to return the cars back to stock for compliance, however once the car "passes" compliance - it gets very hard to "chase it up" for the authorities...

so in a sense... the most viable time that authorities can "police" the RAWS (not revs - revs = pre 2005) the RAWS is BEFORE compliance is passed..

while it's in their shop...

crazy, right? any worker with half a brain would say so what, it's a work in progress.

i mean to say no modified cars can be imported.. is a load of pap.

im sure someone's going to get up me for saying this - but it's entirely up to the RAWS owner and how much money they want to make off their customer.

the RAWS owner is the one that "passes it"

there is no "government inspector" that comes down to the shop n check every car that goes through...

they are bestowed delegated authority to make the call themselves.

the onus is on them and them only to say "yeah okay" or "naaaaaah think i might need to take the bodykit off aye, yeeeeeaaaah gunna be 3 days labour for that aye"

they can "pass" it in whatever form they deem necessary. the only reason that they would make someone install a dash is because they RAWS owner feels like getting his wife a new flatscreen TV. and has to find a way to pay for it.

they can comply it "modified" and nobody would be any the wiser - if authorities come back to him for mods, he can simply push the blame onto the owner of the car n say "wasn't me"

the way they make the customer cough up the cash is...

usually they do the work before they ask.

and when you blast them for your 4 grand invoice - they often give you a ten minute rant about "litigation" and "sueing" and "malpractice" and try to pretend like they know what they're talking about. this intimidates the customer. and they pay it.

forgive the rant. i know it has nothing to do with GTR's... but to say that only "non modded" cars can come in is a load of scat. it is a rule that can't REALLY be policed and is perpetuated by whoever wants to perpetuate it... which is usually those who have something to gain from "returning a car to stock"

on topic - importing a GTR won't necessarilly save you money... but it MAY mean you'll get a nicer car... you never know - there are enthusiasts who DONT thrash their car in every walk of life.

take my soarer for instance, cost me a lot more to import. but the money isn't an issue when you get a mint car with service history and millions of yen worth of name brand mods :)

Edited by Mr Eps

it actually can be policed very easily. say a compliance shop gets a modified car and the customer begs them not to return it to standard as they can't afford it. workshop says ok, they then submit the car to DOTARS online as complied, at this point the car is supposed to be completed and awaiting it's compliance plate to arrive at the workshop. this is the point at which DOTARS will initiate a spot check and they give only 24hrs notice. so no a workshop cannot say 'it's a work in progress' as they have already submitted the car as completed. so if DOTARS arrive to find it not as it's supposed to be it's a big problem for any workshop that would do that. this is why most (should be all) workshops will insist on returning vehicles to standard as it's their business at risk. I would strongly suggest anyone wanting to import a modified car talk to you compliance workshop BEFORE you buy it and ask them what exactly will be involved and what kind of costs you are looking at. that way you can decide up front if it's viable or not. :)

^^^ it seems i was misfed information in the rant i got given!

that makes a lot more sense what you said... when i was being told it i was like "that makes no sense"

but yes - that's sterling advice :)

it actually can be policed very easily. say a compliance shop gets a modified car and the customer begs them not to return it to standard as they can't afford it. workshop says ok, they then submit the car to DOTARS online as complied, at this point the car is supposed to be completed and awaiting it's compliance plate to arrive at the workshop. this is the point at which DOTARS will initiate a spot check and they give only 24hrs notice. so no a workshop cannot say 'it's a work in progress' as they have already submitted the car as completed. so if DOTARS arrive to find it not as it's supposed to be it's a big problem for any workshop that would do that. this is why most (should be all) workshops will insist on returning vehicles to standard as it's their business at risk. I would strongly suggest anyone wanting to import a modified car talk to you compliance workshop BEFORE you buy it and ask them what exactly will be involved and what kind of costs you are looking at. that way you can decide up front if it's viable or not. :)

^^^ this man..

speaketh the trooth... :P

marlin,

I know the car you are talking about as well. it was me that pulled the dash on it well after the RAW did it.

i'm pretty sure they /have/ to give you SOME form of notice...

..not trying to sound cocky when i speak like that but im just saying i highly doubt they're allowed to "rock up" like that...?

on every random inspection I have ever had they just rock up with no notice .

on my last sample car the inspector told me an amusing story where they did another sample car inspection , finished a little early , had some time to kill so wen't back to the same workshop to do a random inspection on a different car

surprise!

they do the same here as well. I know of a few shops that before all this came to a head would let me grab a car - do what I needed to (usually an alarm or similar.) and return it to them., now its a entirely differnt matter. they will rock up and inspect at will.

If inspectors are turning up without notice, then I suggest workshops join the RAWS association and kick up a stink about it - inspectors are meant to give 2 days notice if workshops have not had any prior infringements. Even when workshops have been put through the ringer, they should get 2 hours' notice.

cuts both ways I guess, as long as the inspection itself does not impede on the company's ability to continue working then as the autoworx guy says random 'no notice' inspections won't hurt (although it's probably annoying).

If you're being targeted and it interrupts your ability to do your job then that's when a workshop should complain.

we have no problem with them turning up whenever they want as we have nothing to hide .

as a long term member of the raws association I would encourage MORE random inspections with no notice.

Yeah agree with that to a point. Like you say if you're doing the right thing inspections are not a problem. Once a cars submitted it should be all fine so there is no excuse for failing. but some workshops who are space limited will have cars stored at another site etc so it makes sense to give some notice to save wasting dotars time and taxpayers money.

Anyway at least you've proven what I was saying. People think it's a free for all but anyone thinking they can get away with sub par compliance is living on borrowed time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...