Jump to content
SAU Community

M35 - Nismo Ecu

PetroDola

By PetroDola,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Toshi Proficient

Toshi

Posted
Posted

FCON V (silver) is piggyback.

Its like a Emanage Ultimate.

FCON V pro (gold) like a motech , haltech.(much better than FCON V silver)

HKS selling harness connector for M35(connect to std ecu) so FCON V PRO is able to use auto.

But FCON V PRO is very expnnectorensive.

Around $1000 (ver 3.24-3.3)second hand (new around $1800)and new harness connector around $5-600.

Tune cost around $700-1000.(same motech , haltech)

  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)
FCON V (silver) is piggyback.

Its like a Emanage Ultimate.

FCON V pro (gold) like a motech , haltech.(much better than FCON V silver)

HKS selling harness connector for M35(connect to std ecu) so FCON V PRO is able to use auto.

But FCON V PRO is very expnnectorensive.

Around $1000 (ver 3.24-3.3)second hand (new around $1800)and new harness connector around $5-600.

Tune cost around $700-1000.(same motech , haltech)

you don't happen to have a C34 do you?

Where about's in North Ryde are you?

Edited by Jetwreck
Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)
Are you talking about C34 LAUREL?

I am able to remap ecu for RB25det.

nah don't need tractor motor stuff :down:.... I just thought I had seen you around the area as i'm in your area......how many M35's have you done before?

Edited by Jetwreck
pipster11 Grand Master

pipster11

Posted
Posted

has anyone looked at the plugs on the ecu's?

i'm guessing that they are vastly different but i know of a guy running a vq35de in an n15 pulsar with an r34 ecu running the show (with a bikirom board installed)

food for thought

iamhe77 Grand Master

iamhe77

Posted
Posted
I have already asked Toshi about the doing an M35 ecu and he said he doesn't do them. I'm guessing he would if he had the gear.

As have I... He would tune M35's but the gear he needs has a significant cost to it so, understandably, he isn't tuning them at this point

pipster11 Grand Master

pipster11

Posted
Posted

well this is what my friend said

Machine the exhaust camshaft for a camshaft signal that is constant(not variable cam timed) and have same notching as the R34 CAS, machine the front(passenger side) cylinder head on exhaust cam side to take the camshaft sensor and then used... a Maxima A33 ECU plug, which has the same ECU plug as an R34 but repinned to suit.

In other words, a LOT of work to get the R34 ECU working. It was cost effective for me since I worked out what I had to do with the first few swaps and my motor was already apart for the rebuild before I fitted it :)

However, I think I could work out a more effective VQ25 option with a bit of research :P

i've asked him what his "more effective option" is and i'll let you know what he thinks

  • 5 months later...
andy65b Veteran

andy65b

Posted
Posted

Nip ..... But if you want to ring SAS and talk to Tom he may have progressed in the year and a half his had the ECU.

With our ECu that he has not paid for and not delivered any results... hahahahahahaha :)

ArdentEagle Contributor

ArdentEagle

Posted
Posted

Nip ..... But if you want to ring SAS and talk to Tom he may have progressed in the year and a half his had the ECU.

Year and a half - Shit!

I'll keep that little belief in my heart that one day soon I'll pop back onto this forum on to find the thread - VQ25DET ECU FINALLY CRACKED, ROM TUNING FOR ALLworship.gif

iamhe77 Grand Master

iamhe77

Posted
Posted

Year and a half - Shit!

I'll keep that little belief in my heart that one day soon I'll pop back onto this forum on to find the thread - VQ25DET ECU FINALLY CRACKED, ROM TUNING FOR ALLworship.gif

There is, only catch is you have to send your ECU to Japan :P

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Rom tuning. :down:

I prefer to adjust my own maps. :)

From what I saw, the Nismo rom tune did sweet FA for the low down restriction as the cams are still retarded to buggery down under 30kph.

So I finally purchased a Vmanage which adjusts the cam overlap against load/revs, it should get rid of the stupid low down restriction and allow the turbo to come on much faster. It will also allow me to refit the cable throttle, the only reason I removed it was due to the intake cams going 30 degrees retard or more while in limp mode. So I should now have full engine control again.

There is still the speed cut to think of, but I dont think it will matter when I am controlling the entire engine with the Emanage and throttle with my foot... Finally.

ironpaw Veteran

ironpaw

Posted
Posted

Rom tuning. :down:

I prefer to adjust my own maps. :)

From what I saw, the Nismo rom tune did sweet FA for the low down restriction as the cams are still retarded to buggery down under 30kph.

So I finally purchased a Vmanage which adjusts the cam overlap against load/revs, it should get rid of the stupid low down restriction and allow the turbo to come on much faster. It will also allow me to refit the cable throttle, the only reason I removed it was due to the intake cams going 30 degrees retard or more while in limp mode. So I should now have full engine control again.

There is still the speed cut to think of, but I dont think it will matter when I am controlling the entire engine with the Emanage and throttle with my foot... Finally.

How much is the Vmanage and where?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...