Jump to content
SAU Community

Recommended Posts

hello,

I'm new here and i am looking for either a evo 5 or a r32 gtr as a track car.

I dont know much about the cars itself, but i do know that the gtr is inline 6 running twin turbos and the evos running a inline 4 turbo.

would appreciate some opinions on these two cars

Link to comment
https://www.sau.com.au/forums/topic/337176-evolution-5-or-r32-gtr/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Two totally different cars designed for 2 different type of motor sports.

GTR = Circuit

EVO = Rally

Both have different characteristics.

Best to test drive both and see what you think.

I have only driven an EVO 6.5 TME and was a fun car.

GTR has more pulling power at the top end due it being a 2.6lt inline 6 twin turbo vs 2lt inline 4 turbo.

All depends on what you like, as both cars are good in their own respects and modifications can be endless for both, depending on how big your wallet is... :P

Depends on the usual 100 variables.

What track, what level of mods, whats the budget blah blah blah.

Your question is about as vague as an arts student. :P

More information = better responses.

That said, buy a EVO 6 and forget about the GTR.

most likely use it on the circuttt. But i love both cars, they are both amazing cars.

Welll my budget is 18,000 and below.

I've seen a few gtrs and evos going for that price and under.

Probs spend another 5,000 on mods. but its also gonna be both track/daily drive and comfortable ride

soo its more of a weekend type of car just to have fun with.

I like the gtr but its 5 years younger then the evo soo im still not sure

I'm sort of new with this stuff soo im not really sure about mods

most likely use it on the circuttt. But i love both cars, they are both amazing cars.

Welll my budget is 18,000 and below.

I've seen a few gtrs and evos going for that price and under.

Probs spend another 5,000 on mods. but its also gonna be both track/daily drive and comfortable ride

soo its more of a weekend type of car just to have fun with.

I like the gtr but its 5 years younger then the evo soo im still not sure

I'm sort of new with this stuff soo im not really sure about mods

Spend $23k then and get a decent example rather than a clapped out one for 18k.

You'll probably get a few mods that way as well.

Well its hard to decide cause they are both great cars.

But its such a hard decision but if i spend 23k i could get a evo 7/ or 8 for that then.

The GTR is older but is powerful and still catches my eyes but theres something about the evo that makes me like them alot

im still unsure about which one to get

Powerful but heavy, older and has inherrant risks.

To track a GTR you basically want to change turbos - you wont see much change outta 7k to do that and get all the supporting mods.

EVO's outta the box are a good little car, a nicely modded EVO6 would be a good base. Depends on the circuits etc however.

He said that he want's it to be his daily drive.. so i presume he wants to be able to have it registered. Unless he's an epic badass and enjoy's doing non-rego'd driving :D

I'd suggest the evo perhaps, i recently bought a 17k gtr and so far have spent 3k just trying to get it to go around courners properly.. damn HICAS + old suspension bits..

how much money do you have to spend on it? that will be the deciding factor.

the possibilities are almost endless with the GTR. the EVO is a great car but you are limited by the displacement of their motors. i dont think much else could fit into it.

the GTR on the other hand has had a lot of R&D..... rb30, turbo setups, handling, .. the list goes on and on. and you've always got the option to go RWD when you feel like it.

im currently tossing up between the evo 9/10 and the r34 GTR. it took me around 10 seconds to decide on the GTR for the reasons above.

With a budget of $18k buy an S13 Silvia or R32 GTST... then you'll have money left to fix it up, mod it to your driving style or money to fix shit thats gonna break out on the race track.

This. An S13 with 10-15k of development in it will be faster and more fun than a stockish Evo 5 or R32 GTR.

mmm like previous comments, buying those older cars for even an occasional track purpose is like having a time bomb.

first up even if the engines are still okay, and holds up, you will need new set of rotors/pads almost straightway after hitting the track. then tyres, fluids, cooling systems etc etc. gets a bit more expensive then you may think

mmm like previous comments, buying those older cars for even an occasional track purpose is like having a time bomb.

first up even if the engines are still okay, and holds up, you will need new set of rotors/pads almost straightway after hitting the track. then tyres, fluids, cooling systems etc etc. gets a bit more expensive then you may think

Honestly all that stuff comes under consumables, and you budget for that regardless of if you buy an old car or a new one. Motorsport is never cheap.

how much money do you have to spend on it? that will be the deciding factor.

the possibilities are almost endless with the GTR. the EVO is a great car but you are limited by the displacement of their motors. i dont think much else could fit into it.

the GTR on the other hand has had a lot of R&D..... rb30, turbo setups, handling, .. the list goes on and on. and you've always got the option to go RWD when you feel like it.

im currently tossing up between the evo 9/10 and the r34 GTR. it took me around 10 seconds to decide on the GTR for the reasons above.

There are just as many if not more bullshit fast Evos getting around on race tracks. The 2 litre capacity should'nt be a problem really. Plenty of the evos are making 400-500hp and you can get em down to around 1000kg.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...