Need Someone To Make Up An Intake Pipe(melb)

[scotty nm35]

As there is a vacuum created in front of the compressor, any restriction is amplified. The best option would be a large funnel bolted to the front of the turbo.

[369]

hey scotty

i'm currently upgrading turbo, etc

can you hook me up with one of them 3" intake pipes with the 2 recirculation bits? R34GTT

send you a pm, if you still make?

[scotty nm35]

I need the car at the moment to make a pipe up. I can make a jig off the next 34 that comes in though as I have been asked by a few interstate skyline owners now.

Is the airbox/afm in the same position on the 33 also?

[W0rp3D]

can you make a 33 gtst one with out the car?

How much for one with the bov pipe and vent pipe, if its easier you can put the vent pipe on the turbo side of the intake as i run a catch can and the return hose comes out between the strut and the airbox.

[scotty nm35]

No, I haven't made a jig for them yet as I wasn't sure what style people would want, It looks like most owners want the BOV return and breather plumbed in which adds cost and requires the existing steel piping to be modified. Best to drop around and get it custom fitted how you want it if you're local.

[beemae30]

R32 gtst??? Pm me . Willing to pay good money hehehe

[W0rp3D]

No, I haven't made a jig for them yet as I wasn't sure what style people would want, It looks like most owners want the BOV return and breather plumbed in which adds cost and requires the existing steel piping to be modified. Best to drop around and get it custom fitted how you want it if you're local.

where abouts in melbourne are you?

[W0rp3D]

i also forgot to mention that mine needs to be 3" both ends and fit with the factory intercooler piping, cant believe noboby makes a 3" to 3" intake pipe from any type of material!

[scotty nm35]

I use 80mm usually which is 3 inch internally, you can just squeeze the 3 inch silicone over it. No problem fitting it in with the factory cooler piping and painted black it looks stock. I will definitely make a jig off the next intake I make, it shouldn't be hard to make a few up on the bench then.

[W0rp3D]

let me know when you wanna do it, what suburb are you in?

[scotty nm35]

Hampton Park mate. I will pm you.

[whitneybra]

The 4 inch intake i made that retains factory air box 3071R.

[erik]

As there is a vacuum created in front of the compressor, any restriction is amplified. The best option would be a large funnel bolted to the front of the turbo.

sorry i don't understand, the restriction is amplified?

So does that mean it makes it worse? Or is it the venturi effect?

[scotty nm35]

It means you need the largest pipe possible into the turbo to give it the best chance to flow the most amount of air. Why stop there? These are the twin pods for an 800hp Supra intake I just finished. The airbox will get air forced from the duct on the front bar.

[Abe2]

lol long as thread i can make it if needed still hope you have this sorted

[scotty nm35]

A Big thanks to Scotty nm35, he made me an intake pipe perfectly. If anyone in Melbourne's SE requires custom pipe fabrication, shoot Scotty a PM im sure he will be able to help.

Already helped him out mate.

[Abe2]

thanks scotty u da man

[Mitcho_7]

So is it possible to get a 3" metal intake pipe with the 2 factory returns for an r33 gtst without seeing the car?

I've got a return flow cooler as well, so the intercooler piping is in the factory position.

[Bsa]

It's not hard all skyline intakes are very simular when using a pod. I try and follow the strut curve then let it land about 20 mm off the headlight i can't post pics at the moment. I found no restriction by using 80 od or 76 od pipe I tested it on the dyno on my last car r32 rb20 with a td06. The main restriction is the filter but then it only made a 2kw difference with it off with a 76 od pipe. I have acces to all types of skylines my mates don't mind me borrowing them for a few hours. I can even make them to suite stock air box if need be. Also the oil breather hooked up always seems to cause problems with blow by I tested this as well on my 32 a catch can mounted level or above the breather will allow condensation to find the can but oil stays where it should be in the motor but when mounted between breather and intake it caused the can to fill up. I made the catch can set up for DVS jez drift car and it never has issues with filling up 3 full track days and it's perfect. When you start making 800hp + then pipe size may have a impact

[scotty nm35]

So is it possible to get a 3" metal intake pipe with the 2 factory returns for an r33 gtst without seeing the car?

I've got a return flow cooler as well, so the intercooler piping is in the factory position.

I can make them up on the bench now for stock airbox or pods with bov/breather fittings/hoses, joiners and clamps as a kit out of 80mm alloy. They will fit r33 and r34 and both series C34 stageas. I checked out a 32 intake today which is even easier to make (with only one bend) for oem setups or pods.