Jump to content
SAU Community

Recommended Posts

After trawling teh interwebz, it appears that overcharging can occur if;

1. The regulator is stuffed (duh)

2. The battery is stuffed, eg its dropped a cell

3. There's a bad engine to body earth

Since my alternator was fully rebuilt less than a year ago and its a pain to pull out, i want to have some confidence its the regulator before i head down that path.

So - to check the battery I will disconnect and check the voltage with a multimeter. Each cell is 2.1 volts, and the battery should be 11.8 (uncharged) to 12.6 (fully charged) so if its 10.5 or less i know its the battery. Of course since it starts well so I know the battery is fine from that....and its newish too.....

How do i check the earth? Is it as simple as checking the resistance between body and engine with a multimeter?

Link to comment
https://www.sau.com.au/forums/topic/339670-alternator-overcharging/
Share on other sites

If the regulator is stuffed, it will generally put out more voltage as the revs increase. So, with the engine running, measure volts across the battery terminals at idle, then bump the revs up to around 2k and measure again. If the voltage increases, then the reg is stuffed, and it will eventually kill the battery (battery will not be able to hold the charge supplied by the alternator).

what is the charge rate? 14.7ish should be the upper limit.to testing batt cables for overcharging is easy. if the voltage at alternator is more than say half a volt higher than battery then you have a cable fault. ie 16 at alt and 15.5 at battery wont be cables. if its cables you will see 16 at alternator and 12 or less at batt. dropped cell doesnt necessarily mean it will overcharge. the regulator might be able to be pulled out without removing alternator if its such a big deal. its the black rectangular box on the back of the alternator. just undo the 2 screws and gently pull it out.if the wires to the brushes which are part of the regulator are rubbing on the housing then it can overcharge but it should have a piece of mica in a slot to prevent that.

Edited by t_revz

interesting question....my stagea is currently charging at 15.5v, no change after replacing the alternator.

there is a recent thread elsewhere here where 2 different people have overcharging issues, resolved by adding a missing fuse (or replacing a blown one). I don't understand but it was the same symptom and same fix for both

yeah duncan both those guys recently have had stageas too!! and they both had a missing fuse not a blown one. i really need to pull a couple alternators down and see how they work to be more specific for testing. i guess from the sounds of it both wires in plug prob will be ignition. the larger white wire are meant to be ignition to excite it and other wire is to do with the regulation side of things i think. i guess check fuses and see if both have power and let me know

what reading is the alternator putting out when the car is running? 14v is fine, anything much higher isn't. that's generally how you test the voltage regulator as far as i know.

Ive only used the dash gauge so far - 18 volts at any rpm much above idle. I will check at the battery with a multimeter for confirmation. I thought i was going crazy (well, crazier) after checking two times that i didnt have the wipers on the fast setting..... :D

my grandparents camry had the voltage regulator let go. was charging at 18v. blew a lot of the lights in the car, and they were driving along and all of a sudden the wipers started and wouldn't stop. the voltage had fried the wiper motor too

jeebus don't run it like that! I fried by boost controller, ecu injector drivers and stereo at only 15-16v in the course of 2 weeks

Im not except to get it home. Had the headlights on and I clutched in as much as I could to get the engine back to idle...

Interesting about the ABS - cant understand how that could cause overcharge but i'm not good with electrics. Also reminds me that I also a headlight appeared dead then came one so i guess i'll just check what i can with it in case its related somehow.

Mine overcharges also, at 15V and after 15 min of driving it drops down to 14.5 and the battery light goes off. I hate that battery light.

I've checked with the multimeter and it's definitely the alternator pumping out the 15V.

I'm afraid that even if I change the alternator knowing my luck this would not solve the problem :\

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice one, I'd argue that the white S1 RS260 is certainly the best looking of the Stageas. And yes, fully agree on the forum situation. It's a bit of a shame, but at least SAU is a good place to be. I found the facebook groups to give me FOMO because people were trying to one-up each other and show off in some way. Feels much more natural here. There are people with seriously nice builds, but I can appreciate it rather than it making me question my life choices. Might be that people are more open with sharing how much work/money/suffering it takes to actually get there. 
    • Evening, wanted to pop in and finally register to say hi to everyone here on SAU!   It's been a while since I've been active on a forum, but back in the day I used to be relatively active on ClubLexus and other hobby-related forums. I'm glad to see SAU is still around, since with the advent of Facebook and Discord it seems forums aren't what they once were. As a recent new owner of an S1 260RS Stagea, I've found so many older guides and helpful tips from SAU that I figured I needed to join and say a grave thank you. My recent acquisition has only become legal in the US for the past year, and knowing that similar car enthusiasts from across the pond have already figured out the kinks and tricks to get these 25+ year old cars running well. I look forward to diving into more of the SAU forums as well as hopefully contribute some info myself for future posterity.   As a pic tax, here is one of the few good photos I have of my Stagea. I hope to get way more in the future!    
    • Is this where I say "Hey man my airbox cost me horsepower in my Naturally Aspirated Engine"? (I know you need them for legality in NSW)
    • 1.5mm alloy folded up, it will need a tweek, as the angled bend only got to around 45° as that was the max that the break press would get with the other bends, and I needed a fair bit more, but and the alloy is easy to bend too my will by hand once I trim the lower section out I'll Dremel out and form the angle and mounting point on the lower section when time permits  As for the lid, I'm looking at going a "cap", instead of a flat lid to hide the fixtures a bit
×
×
  • Create New...