Jump to content
SAU Community

Recommended Posts

Have just finished fitting GT2860-9s to my car, when cruising along in 5th at 100ish going up hills with light load it starts making a sound like a steam train, it does not surge power wise, but it just makes this noise for as long as I hold it on light throttle, so I back off, it stops, accelerate, still not there, lift off to hold 100k, it starts again.. It did used to do the same with stock turbos but rarely, and not as bad.

Questions:

Is it compressor surge?

Apart from being bloody annoying is it doing any damage?

With a PFC and a tune will it be possible to get rid of it? (or what will?)

Link to comment
https://www.sau.com.au/forums/topic/340270-is-is-compressor-surge/
Share on other sites

Its a typical GTR problem, but my soarer also does it sometimes,

Its because the Dash-9s in your case want to spool up very quickly, but the engine cant swallow it so it spits the excess air back out the turbo inlet, which slows 1 turbo down as the air comes back out then vice versa with the 2nd turbo.

Do you have the standard Bovs on the car or aftermarket ones? the standard ones are always open when the intake is under vacume to help prevent this.

hey mate yeah mine does exactly the same thing ive got gtss(same same -9) apexi intake and still have the standard bovs. Mine does it at zero vacuum and i was thinking that it was the bovs opening a little and air flowing through them but i havnt tested this theory. i might have a play next week.

I dont think its anything to worry about but up a slight hill it can be a bit annoying.

Apexi pods and turbos are the only mods, does it on any boost setting (7,12,18). Turbo shuffle sounds far more likely, that is the noise I am getting, remember hearing talk about it previously but had forgotten until GTScotT mentioned it. Definately not the induction noise.

does it go away when you put your foot down? my -5's with apexi pods do the same sort of thing at around 3.5-4k, i think its just something to do with the way the exhaust housing is designed.

  • 2 weeks later...
  • 2 months later...

This basically happens when the engines displacement is too small for the turbo application. What you need to do is think of it a little like this. An rb26 with twin turbos is essentially like having x2 1300cc displacement engines with single turbos on each (which in most cases is too large for the displacement. As you can imagine as you increase the turbo size (say gtrs's, -10's or even -5's) your tubro shuffle, compressor surge or axi-symmetrical compressor stall (what ever the hell you want to call it) will get worse. Hence why almost all gtr's fitted with gtr's or -10's will shuffle at some point in the rev range. Get an sr20 slap on one of the said turbo's to it and you wont see that type of shuffle (2000cc displacement engine running a turbo more efficient for its displacement).

Now on how to try cure it. You can increase tge turbine housing to try slow the compressor down, (or use smaller turbos), but here you will run into another dilema, LAG. You can increase the engine displacement (why you generally wont here shuffle on a rb30/26 engine with -10's etcetc). You can try have your tuner tune it out, baffled turbo pipes etcetc. But the most effective way ive found is to use a 3 dimensional boostcontroller. Its basically an electronic controlled solenoid (by the ECM) with an rpm input ( which alters the duty cycle of the boost control valve as the RPM changes), and a throttle position sensor input (tells the turbo how much power the drive is demanding and essentially tells the turbo how much air the engine is capable of swallowing to avoid such a surge). 9 times out of 10 this will work.

p.s ( i love brackets)

(same)

u can also try lowering the gain setting or start boost dependong on ur boost controller. This helped with mine it makes the turbos slightly laggier but helps prevent choo choo train.

i have n1 's. Sunce changin bac to stock intakes it is gone completely

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...