Jump to content
SAU Community

Recommended Posts

Im wondering if anyone can help, it seems to be getting alot more fequent. The whole car is shaking under acceleration its happened about 5 times over the last month, it first did it about 2 years ago and as soon as you take your foot off it doesnt do it again Before it started becoming regualar its happened like about 2 or 3 time in the last 2 years. Im just wondering what it could be cause if i take it the the mechanics it will more than likely wont do it.

Link to comment
https://www.sau.com.au/forums/topic/341486-car-shaking-under-acceleration/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Can you describe the shaking? Is it like a side-side vibration, or a surging/rough running of the engine, etc. Especially, do you feel it through the wheel?

Edited by DaveB
Im wondering if anyone can help, it seems to be getting alot more fequent. The whole car is shaking under acceleration its happened about 5 times over the last month, it first did it about 2 years ago and as soon as you take your foot off it doesnt do it again Before it started becoming regualar its happened like about 2 or 3 time in the last 2 years. Im just wondering what it could be cause if i take it the the mechanics it will more than likely wont do it.

Got the same thing , seems to happen more when in `auto` second gear , i think that it is the gearbox as have checked drive shafts and no play there !

Sorry i should of been more explanitory with it, tyres and reasonably new with correct tyre pressures an have all been balanced recently.

The shake is small vibration that can be felt through every part of the car and get worse if i excelerate more when it happens and disapears as soon as i take my foot off the accelerator and then doesnt happen again. Its totally random when it happens and it doesnt happen very often. I do alot of driving so i cant really have a mate follow me round for 2 - 3 weeks hopeing this shake will occur.

It has become more fequent. Im not sure but it could be related to the attessa system as i drove it with the spare tyre on for around 3km and when i did the whole car was shaking violently 100x more than when it does it now due to the fact the tyre being 30mm smaller in height than my stock wheels, when that happened the torque gauge was on permenently. I cant remember if it gotten worse since then for the simple fact is that its very very occasional but it does seem to be getting worse and was there before i did that.

It feels to me as though something is off balance to do with the engine or drive train just by the way it happens but if you would think if that was the case it would do it all the time. It doesnt feel like rough/surging engine because it doesnt seem to affect power but if i put my foot down it does seem to get worse

Hope that answers all your questions.

Stu

Atessa fluid levels been checked? Does it feel like milder version of shaking like having the spacesaver on?

Havent checked fluid levels but i will straight away sortly and get back to you.

yeah sorta, its hard to tell cause the small shake that it makes is so minimal compared to the shaking that was made when i had the space saver on

Edited by sturb25

It's funny that this topic comes up now - one of the things I plan on doing this weekend is getting under my Stag and having a look-see, as it too gets the shudders on under hard acceleration - but only sometimes.

I've tried driving with the synchroniser active (and I know how this function works) - no change.

It tends to be a 'once your going' issue, I don't remember it happening from 0km/h.

The steering column 'shakes', but it's not like the rotational shaking that an unbalanced wheel will cause.

The ATTESA is working on my car, the front wheels will chatter if the Synchroniser is on at low speed and high steering angles - as it should, it also has gobs of grip when you give it heaps of lateral load and throttle. That's not to say that the problem isn't somehow related to the AWD system.

There has also been a slight vibration at 100-110km/h which I would normally attribute to wheel balance - but it can come & go while at a steady state speed.

I'm convinced the issue is in the front end, and I know it's not worn shocks. I might pull the front shaft today and see if the issues are present in RWD-only.

Mine shakes like this but only sometimes, usually when I have less grip. Its definitely related to the front wheels/ transfer case as it only happens when the front torque gauge is pinned, and is more common when I come out of a corner hard, or accelerate downhill. Its been happening for over a year now and it's not getting any worse, I just figure its the wheels slipping taking up the slack in the drivetrain for a second then repeating.

I would have thought GTR's would have similar issues if this was an Attessa problem though.

Hi BEN,

Welcome back! What rock have you been hiding under?

First thing I would be doing is ECU reset, followed by a bleed of the attessa system (remember there is two nipples one on the rear or the gear box just above the hi-pressure line and one just above the rear diff).

Then checking wheels.

The 'getting the DR30 ready for the Nationals last month', 'getting ready for the birth of our second child last month' and 'getting the Z ready for Nationals in Easter 2011' rock!

:P

There are no codes in the ECU (I have an ECUTalk), but I will check the fluid situation. The issue was present with other tyres and wheels in different positions, so I'm inclined to think it's a bit 'deeper' in the driveline.

my m35 got new tie-rod bushers the other day and the vibration at 100 is gone, plus it also got a wheel alignment today. (they looked like a long bolt with a busher over the top and t piece shaped on one end)

ive got a printed out breakdown of the front suspension on paper .. ill have to scan it and put it up with part numbers

Edited by PetroDola
It's funny that this topic comes up now - one of the things I plan on doing this weekend is getting under my Stag and having a look-see, as it too gets the shudders on under hard acceleration - but only sometimes.

I've tried driving with the synchroniser active (and I know how this function works) - no change.

It tends to be a 'once your going' issue, I don't remember it happening from 0km/h.

The steering column 'shakes', but it's not like the rotational shaking that an unbalanced wheel will cause.

The ATTESA is working on my car, the front wheels will chatter if the Synchroniser is on at low speed and high steering angles - as it should, it also has gobs of grip when you give it heaps of lateral load and throttle. That's not to say that the problem isn't somehow related to the AWD system.

There has also been a slight vibration at 100-110km/h which I would normally attribute to wheel balance - but it can come & go while at a steady state speed.

I'm convinced the issue is in the front end, and I know it's not worn shocks. I might pull the front shaft today and see if the issues are present in RWD-only.

My stagea is a manual and i dont believe its the same issue, as mine does it anytime, doesnt have to be under hard accecleration but accerating normally it does it and my shake it not really from the steering column, its the whole car, and it always happens at a slower sort of speed say from 20-80km/h.

checked attessa fluid level and its all good.

My stagea is a manual and i dont believe its the same issue, as mine does it anytime, doesnt have to be under hard accecleration but accerating normally it does it and my shake it not really from the steering column, its the whole car, and it always happens at a slower sort of speed say from 20-80km/h.

checked attessa fluid level and its all good.

Fair enough.

I dove my car for about 3 hours in the Adelaide Hills today (with the family, but still semi-brisk - we were pressed for time!) and I don't recall it giving me any grief.

I attempted to remove transfer case/diff shaft later today, but why the hell does Nissan insist on making the flanges just that little too small to fit a ring spanner or socket onto (my Z is the same!). The fasteners were just too tight for a successful hasty removal, so I abandoned that line of work (for the time being) and just bled the ATTESA. No obvious signs of worn/torn or otherwise stuffed suspension parts. Next step will be a wheel balance and rotation.

ECU reset? :) How is an ECU reset going to fix a steering shuddering problem? :)

:(

Had this same problem last year (not with the Stagea tho). Turned out to be a very minor amount of play in the CV joint. Get under the car, grab the CV shaft and you'll find it will move ever so slightly, hard to notice unless you are looking for it ... maybe 0.5mm. This is enough to shudder under hard acceleration.

Hope this is what you are looking for. If you don't know what you are looking for, take it to a front end specialist and ask them to check out the CV shaft play and lower arms, and tie rods too (but normally tie rods shudder the car under heavy braking).

:(

Im sure u got the same problem as i have, its very random. i found it did it when u let your foot off the throttle for a corner or roundabout and when u get back on it starts to shake realy violently but as soon as u back off the throtle and get back on it totally disapears? im thinking attessa because ive had mine i rwd (front shaft removed) since the dyno tune and it feels alot smoother now. its not sumthn thats out of balance because it doesnt get better or worse with speed im thinkn transfer case or sumthn. or its just slack in the gtr drivline they are overbuilt.

Are your tyres getting worn, rear relative to front??

Methinks attessa is the issue.

DEFINATLY NOT , HAD THE ATTESSA WINDING UP THING WITH UN EVEN FRONT TO REAR GIVES A KANGAROOING SURGING FEELING

Can you describe the shaking? Is it like a side-side vibration, or a surging/rough running of the engine, etc. Especially, do you feel it through the wheel?

THE SENSAITION IS AS IF SOMETHING IS STUCK BETWEEN THE BODY AND THE ENGINE / EXHAUST WHEN THE CAR IS RUNNING CAUSING A VIBRATION THROUGH THE BODY - A BIT LIKE ALL 4 WHEELS ARE LOOSE OR THE SAME AS AN UN BALANCED PROP SHAFT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...