Jump to content
SAU Community

Recommended Posts

Car has:

BLITZ 700cc injectors (most effiecient lag time of all 700cc injectors) $600

BLITZ K5-660r ($2800 new)

BLITZ D1GP manifold (made by their race department, not a buyable part) cost $2000new

BLITZ 47mm Gate with dual screamers. $1000 new

Mega responsive (full 22psi by 4000rpm) 400rwkw setup on BP98 @ 22psi, made 420rwkw on e85 before the injectors ran out, i envisage 460rwkw on E85 @ 22psi

$3800 no offers (if it doesn't sell it will go on my Aristo as i would rather keep it)

ATI 1000hp balancer and water pump pulley (200km old) $600

GREDDY oil Pump (200km old) $700 pics below

RB26 EAGLE H-beam rods $400

New Greddy coil-overs (setup for RB 12kg and 6kg) have original 8kg and 6kg springs too. $1200

Full R32 GTR rear Nismo Arm kit ( lower and traction arm all new) $400

Front s15 NISMO control arm (will fit r33 or if you want to widen track fit to s13 and r32 ) $250

Zenith guard bracing (extensive chassis strengthener) $250

rebuilt steering rack $100

Adjustable toe arms $100

Uras castor rods $200

Uras extra lock tie rods and spacers $200

Super Now tie rod ends $100

Nismo 2way 5000kms $800

R32 GTR cradle

5 bolt shafts not the weak 6 bolt

Str8 thru exhaust with twin rear bozuku flutes $150

oil cooler kit $200

Greddy 115mm intercooler ($2500 new) $600

Greddy radiator (r32 gtr) 1000 new $600

tomei fuel pump (sold) $350

Powerfc d-jetro and all sensors $1200

R34 GTT box bought with 17000kms $1500 can supply it as push or pull, currently setup as push (r33)

BLITZ twin plate (top of the range ORC) $1200

5 stud conversion, S15 front spindles, R32 gtr rear brakes, r33 front brakes, Blitz MR3 pads ($700 when new rear unused, front 80% left) whole lot $1200

whiteline sway bars adjustable front and rear $250

half cage suit sunroof $350

drift tacho and oil temp, oil press, water temp gauges $300

nardi steering wheel

vertical hydraulic handbrake with booster for one finger actuation (std still in place and working) $250

drift kevlar passenger seat with s13 rail $250

2 x sets 17x9 +15 uras ns02 all round with new toyo proxes 4 tyres $1500ea set

High Uras GT wing $200

Uras clear tailights $120

Genuine c-west bonnet $420

Super Made 180sx headlights (see pic) $150ono

much much more or take the lotl for $15k or will split over the next few weeks

IMG_3771.jpg

IMG_3772.jpg

th_catdyno21.jpg

20070522_330ab487e4fd94335bbeg8qPIp.jpg

Newengine001.jpg

Newengine019.jpg

IMG_3764.jpg

IMG_3765.jpg

Newengine006-1.jpg

headcomponentsferrea.jpg

sub2.jpg

ABCD0015.jpg

post-34927-1288352469_thumb.jpg

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hey there how much u asking for the full turbo setup? and what turbo is it

$3800 no offers (if it doesn't sell it will go on my Aristo, its just to good to sell)

BLITZ K5-660r ($2800 new)

BLITZ D1GP manifold (made by their race department, not a buyable part) cost $2000new

BLITZ 47mm Gate with dual screamers. $1000 new

Mega responsive (full 22psi by 4000rpm) 400rwkw setup on BP98 @ 22psi, made 420rwkw on e85 before the injectors ran out, i envisage 460rwkw on E85 @ 22psi

Trent its andrew with red sil80 if you can, hold the guard braces and gtr subframe till i get back from japan if possible..... but if get buyer selll sell sell!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone. Is there a way I can get the original window sticker (maroney label) for my 1995 R33 GTST? I doubt I’ll be able to ever get it but it’s worth a shot to ask
    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
×
×
  • Create New...