Jump to content
SAU Community

Recommended Posts

Can someone Part number me??

I need the rear spring Cradle(arm) bushes.

Front right arm boot? (someone give me a name)

and most importantly, the link that holds up the Sway Bars for the rear. one of mine snapped, so we found out yesterday.

All for an 2003 ARX(dont know if it would be any different, doubt it)

Cheers.

SEC 275 is a reference to which section in FAST the part is located (Section #275), and really helps when navigating the pictures.

The 11925M is a FAST part reference but not the actual part number.

Anyway, here is the pic for section 275, so I can only presume that the assembly highlighted is what you are after (although it does look a little small in the pic).

post-31842-0-83623500-1293063296_thumb.jpg

You can see below the illustration that there are two part numbers for this assembly

11925-AG300 and 11925-AG30A.

Only 11925-AG300 brings up our VQ25det in Parts Master so go with that, although it may have been superseded by the 11925-AG30A part which brings up VQ35de and VQ25dd, ie series 2 M35's.

Had a few nice long runs over Christmas, I get over 400ks to 70L of Caltex Ethanol on freeway cruise with the occasional squirt. Also found the Lilydale Caltex Eflex pump is installed. :thumbsup:

Merry Christmas... :cheers:

might have sold my sprinter finally... will see, have 3 people very "keen" will believe it when i get the cash but.

then intercooler, fuel pump. go on holidays and then ecu and new turbo/gate set up

SEC 275 is a reference to which section in FAST the part is located (Section #275), and really helps when navigating the pictures.

The 11925M is a FAST part reference but not the actual part number.

Anyway, here is the pic for section 275, so I can only presume that the assembly highlighted is what you are after (although it does look a little small in the pic).

post-31842-0-83623500-1293063296_thumb.jpg

You can see below the illustration that there are two part numbers for this assembly

11925-AG300 and 11925-AG30A.

Only 11925-AG300 brings up our VQ25det in Parts Master so go with that, although it may have been superseded by the 11925-AG30A part which brings up VQ35de and VQ25dd, ie series 2 M35's.

I chased this up with my mate that orders my parts, he said that the AG30A supercedes the AG300 - so either will work fine. It'd be a 3-4 week wait if I ordered it though.. May have to see someone has a broken motor that they're willing to part out :O

Jason Don`t FORGET THE PORT DUDE :thumbsup:

and other essential recreational drugs of interest. just a few quick snaps from our chalet near the walpole national park inlet. we went as far as peaceful bay, walpole, denmark, margaret river, yallingup and geograph bay in 5 days. was awesome. stag did well on the twisties.

btw ppl, south western highway near pingerup is in shite condition, needs resealing. we bypassed Busso bcos of heaps of piggaz for Southbound festival.

anyways, off to freo this arvo to chill out to xavier rudd, should be mellow as fark. which my head is sayn is a good thing. lol

imgp0548copy.jpg

imgp0544copy.jpg

imgp0543copy.jpg

so less :whistling: Bullshit did you get any PORT :wacko:

nah charles. but a endless bottle of rare breed was downed at leisure. lol @ your -4 reputation meter bro.

ive come to the conclusion that xavier rudd is mother natures gift to humanity. concert was uber chilled and it was choice having a picnic dinner whilst watchn the sun set in freo with a few little creatures ales in hand. i really enjoyed "come let go" but "my missing" had to be song of the night. decent atmo, no long bar lines, no agro and even a smokers area. well organized event.

Edited by dirtyRS4

well got a 3 grand deposit down today, just have to wait for the rest of the cash to come through!!!

didnt realise you were in perth. getn rid of the ae86 mustv been tough. 3 grand in the hand is 3 grand in the hand though. imo get the rest & spend it wisely.

Edited by dirtyRS4

:spank: Jason NOT PORT :spank:

but a endless bottle of rare breed hope that was KEPT IN ICEBOX :whistling:

with have to sort out a Chesse&port night :thumbsup: ,se if i can edumocate you aussies :3some:

as you can`t PLAY :P CRICKET :rofl2:

  • Nope 1

didnt realise you were in perth. getn rid of the ae86 mustv been tough. 3 grand in the hand is 3 grand in the hand though. imo get the rest & spend it wisely.

yeah another 3 grand this weekend for it, got snapped up quicker then last time i posted it. and it was an ae85 btw :P but i had done a bit of work, only lost 1g on it so yeah its not so bad...

yes well bought the cooler today, rang up hyperdrive and got a quote for fuel pumpage and installation of said intercooler.

i get paid again this week and we just got our old house bond back, so.... money has gone into savings, now i just have to figure out if i want to go nistune, omg finding a stock fking ecu so i can get it chipped is proving to be difficult. and what turbo setup i want to go.

dont want to spend to much time in the shop.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...