Jump to content
SAU Community

Recommended Posts

I actually think you have priced it spot on and I'll explain why.......

Exactly two years ago I sold a very nice black ADM (to Perth) for around $35K. It had about 175,000 kms but in excellent condition like yours.

It took me 7 months to sell and the mileage was always an issue.

Yours has another 90,000 kms on the one I sold which in my book is worth about another $8K-$10K less. 

If we deduct that of what I sold mine for we would land in the high $20K region.

We all understand that during R32 GT-R's in general have increased in value approx 50% over the last 2 years and increasing, they have nowhere near peaked. 

When you do the sums, low to mid $40K's is about right.

With all that said, you will either get knock over in the rush and sell it immediately or suffer the same issue I had where collectors just won't buy a high milage car.

An enthusiast would probably prefer a lot lower milage JDM for similar money

It is probably easier to find a buyer at $100K with a sub 60,000 kms ADM car.

Regardless, it presents lovely in the pic you posted and a credit to all the owners in keeping it factory original considering all the useage it has had.

Good luck wit the sale, please keep us informed.

Cheers,

Bob.

Yes wasnt happy with the front bumper and mirrors from previous owner so i had them painted other wise just some hand polish. I have enjoyed the 4 years that i have had it for and now time to buy something old and restore/modify build up and get that satisfaction of doing it yourself ( and getting help from my 2 girls ).

20 hours ago, Aussie_Delivered_R32_GTR said:

With all that said, you will either get knock over in the rush and sell it immediately or suffer the same issue I had where collectors just won't buy a high milage car.......Cheers......Bob.

 

5 minutes ago, nizpwr said:

Deposit taken for car.

Thanks again everyone for insight/feedback regards to my beast 

Guess I was kinda right......... Congrats on the sale.... Bob.

10 minutes ago, Zapman said:

Hi all,

I have recently purchased an Adm. Vin ending with 16098. Would love to know abit of history regarding this car.

Thanks 

Welcolm...... Based on that it's build #32, Black.

I don't have any other info.

Can you please advise when did you buy it, from where, milage?

Are you Sydney based?

Photos?

Any info may help to jog peoples memory.

Thanks,

Bob.

35 minutes ago, Zapman said:

Yes mate. Came from Queensland 

Yeah.... The gold badges were the unique give-away.

The milage surprises me though. It was advertised with about 148,000kms then (18 months ago).

I know it took forever to sell (as did mine at the time) so maybe the mileage creeped up in time.

Anyway good luck with the resto and if you need a hand with anything or would like to catch up for some pointers, please drop me a PM.

Cheers,

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...