Jump to content
SAU Community

Recommended Posts

hey guys, just looking around for some good work shops in sydney iv got hills motorsports in mind as iv had a friend do some work there and has been quiet happy.

im looking at spending some big money on my r33 gtr and picking the right person to do your work is something i wanna make sure of

so let me no what some of your experiences have been like getting work done with mark...

thanks jason

Link to comment
https://www.sau.com.au/forums/topic/343830-thoughts-on-hills-motorsports/
Share on other sites

im not looking at just going off one persons story as i no every work shop has a good and bad story but just after some thought and experiences that some people have had there.

i wanna be able to put my car in a work shop and not have to worry about things that i want done not being done and making sure that everything will be done right as i am looking at doing some major work to my car

im not looking at just going off one persons story as i no every work shop has a good and bad story

This is exactly why we DON'T want these threads continuing on.

One saying that's always stuck in my mind is: "There's always three sides to every story - his side, her side, and the truth..."

If you're happy to deal with sending and receiving PMs, then fine, but otherwise, please refer to this: http://www.skylinesaustralia.com/forums/Re...er-t228238.html

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...