Jump to content
SAU Community

Recommended Posts

2 hours ago, Lithium said:

Nice!! Cheers for sharing :). More or less what one would expect, as you said.  A few hundred rpm laggier too by the looks?  And this would be on an RB30?

 

 

 

No problem.

Yeah I was hoping it wouldn't really loose anything down low but definitely did. However you wouldn't really know it to drive, and the plan was to try some E in it too. 

Yes, 25 headed 30.

Really really interesting how much... Or little difference the  a/r change made.  Is this a divided setup?  

And crikey - this looks like it's going to end up being a complete animal.

32 minutes ago, Lithium said:

Really really interesting how much... Or little difference the  a/r change made.  Is this a divided setup?  

And crikey - this looks like it's going to end up being a complete animal.

Yeah for sure. I started off with a .7 AR then .8x then 1 and came on earlier each time.

First time it has lost a little down low, but comes on hard!

44 minutes ago, Lithium said:

Really really interesting how much... Or little difference the  a/r change made.  Is this a divided setup?  

And crikey - this looks like it's going to end up being a complete animal.

Yes divided.

Nice, really interesting results overall.  What is the difference between the blue "E68" and the green "E68 boost earlier" curves?

655kw @ wheels isn't messing about at all, should be hell of a fast car there :)   The spool looks better than a few of the GTW results I've seen, quite cool to see a 25 head being used for something of this kind of power-  is it still VCT?   

 

1 hour ago, Lithium said:

Nice, really interesting results overall.  What is the difference between the blue "E68" and the green "E68 boost earlier" curves?

655kw @ wheels isn't messing about at all, should be hell of a fast car there :)   The spool looks better than a few of the GTW results I've seen, quite cool to see a 25 head being used for something of this kind of power-  is it still VCT?   

 

Blue had more WG duty from the start and really cold day.

Have not really seen any other results except I do have a GTW 3684 on a 25 I have graphs on.

Has everything there for VCT but not running currently, on my list.

 

Good power!  But yeah, solid point @Dose Pipe Sutututu - its what, 100kw at 4000rpm???  That is possibly the least power I've ever seen from an RB30DET at those rpm! :O

 

Edited by Lithium
  • Like 1

It's a dedicated drag car but running H-pattern for something a little different.

9.81 @ 142 with high 400s. New set-up should go a fair bit quicker.

 

More boost still to come. Plan is up to up it to around 40psi.

 

IMG_8896.thumb.jpg.baffdfa1cbc7f8b80c404aaf722f7d09.jpg

 

  • Like 2
Good power!  But yeah, solid point [mention=22311]Dose Pipe Sutututu[/mention] - its what, 100kw at 4000rpm???  That is possibly the least power I've ever seen from an RB30DET at those rpm! :O
 


Not a DET [emoji6]

See original post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...