Jump to content
SAU Community

Recommended Posts

The bit they had on the new Tires was interesting after a conversation i had with some Michelin big wigs last week.

When all the suppliers placed their interest Michelin pulled out when told that F1 wanted a tire that would "go off quicker" as it goes against Michelins philosophy of endurance and "economy".

There has already been some comments that the team cannot talk about the falloff due to the Pirelli being unhappy with the negative media already

Also noticed that One has Ferrari listed as "Scuderia Ferrari Malboro"

The bit they had on the new Tires was interesting after a conversation i had with some Michelin big wigs last week.

When all the suppliers placed their interest Michelin pulled out when told that F1 wanted a tire that would "go off quicker" as it goes against Michelins philosophy of endurance and "economy".

There has already been some comments that the team cannot talk about the falloff due to the Pirelli being unhappy with the negative media already

Also noticed that One has Ferrari listed as "Scuderia Ferrari Malboro"

really? wow thats a bit risque!! hadnt noticed but wll look next time.

i like the idea of trashing tyres easier. makes for smoother racing. and yet the wing (which i can still see failing spectacularly) and the Kers should add the speed back into it.

Vetools time was with the wing up as much as possible and kers in use....neither of which they had last yr at this point.

woot Q1...envious of those that are there. thinking of making it our honey moon next yr. perfect timing.

Edited by boiracer

really? wow thats a bit risque!! hadnt noticed but wll look next time.

Its on the 1HD timing not the BBC one, so when they had a run down of the prac sessions pre qualifying

:unsure: Heidfeld out in 1st Qualifying session!!!

agreed. that was awesome. and lucky.

Kobayashi neeeds another drive somewhere. that was a champion effort. dam that little guy can drive!(although sauber does look alot stronger this yr already)

Edited by boiracer

Did you notice webs having a look @ the bottom of vetel's car when they were parking up after the last qualy?

koby was dammed impressive and it seems like someone lit a fire under sutil finally, dammed hot drive and one hell of a save, was thinking I'm about to watch sutil's death when he spun. sauber look hot this season.

torro in q3, holy shit.

what about massa baby, shit we area about to get eliminated, here's pull 2-4 seconds out of your ass with like 3/4 the lap done. that shit was insane.

vetel's time better than pole last season, Hol-ly f***.

Two things just happenend:

1. Either vettel is a finger wagging genius, or webber is jut as utterly useless as i thought

2. Vettel is going to go back to back. He may not even break a sweat to do it

And mclaren and ferrari are the wrong way around? where the hell did that come from louie!?! Nando will be dissappointed losing out by 1.4secs from pole.

So the bulls werent using kers, and apparently they arent saying why. Leading one to believe theres a potential issue

If for whatever reason they dont have this sorted by tomorrow, expect lewis and jense to absolutely mob them from the line

which would be a shame for vettel after that great performance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...